How to Properly Install a Seat Cushion on 2008 Dodge Magnum?

To install the seat cushion, review warnings, position the cover and foam, and connect j-straps 1 and 2. Place the assembly on the frame, install clamps 1, connect the wire harness if applicable, tighten bolts 2 to 10 Nm, and reconnect the battery negative cable.

OEM 2008 Dodge Magnum Seat Cushion

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Cushions found

View related parts
2008 Dodge Magnum Seat Cushion Pad, Rear Part Number: 5139653AA
$426.18 MSRP: $677.00
You Save: $250.82 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Foam - Seat Cushion; Seat Cushion Pad, Front, Rear; Foam Seat Cushion Rear; Foam Seat Cushion; Seat Cushion
- Position: Rear
- Item Weight: 6.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139653AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- R/T, SE, SRT8, SXT, SXT Special Edition | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2008 Dodge Magnum Seat Cushion Pad, Rear Part Number: 5127489AA
Product Specifications
- Other Name: Foam - Seat Cushion; Seat Cushion Pad, Front, Rear; Foam Seat Cushion; Seat Cushion
- Position: Rear
- Item Weight: 5.50 Pounds
- Item Dimensions: 27.3 x 24.7 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5127489AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Magnum Submodels:
- R/T, SE, SRT8, SXT, SXT Special Edition | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2008 Dodge Magnum Seat Cushion Parts and Q&A

Q: How to Properly Install a Seat Cushion on 2008 Dodge Magnum?
A: To install the seat cushion, review warnings, position the cover and foam, and connect j-straps 1 and 2. Place the assembly on the frame, install clamps 1, connect the wire harness if applicable, tighten bolts 2 to 10 Nm, and reconnect the battery negative cable.