How to Service and Repair the ABS Control Module on 2008 Dodge Ram 2500?

Before servicing or repairing the Electronic Brake Control Module, unconnect the negative battery cable from the battery. After that, lift on the ABM harness connector release and remove the connector from the airframe. After that, undo the screws holding the ABM to the HCU and disconnect the pump connector before pulling the ABM from the HCU.

OEM 2008 Dodge Ram 2500 ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

View related parts
2008 Dodge Ram 2500 Control Module Part Number: 68031761AA
Product Specifications
- Other Name: Module - Anti-Lock Brake System; ABS Control Module; Hydraulic Unit; Module Anti-Lock Brake System
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.1 x 6.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68031761AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Ram 2500 Control Valve Part Number: 55366224AN
Product Specifications
- Other Name: Module - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; Control Module; Modulator; Control Unit Anti-Lock Brake
- Item Weight: 5.80 Pounds
- Item Dimensions: 8.8 x 7.2 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55366224AN
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS

2008 Dodge Ram 2500 ABS Control Module Parts and Q&A

Q: How to Service and Repair the ABS Control Module on 2008 Dodge Ram 2500?
A: Before servicing or repairing the Electronic Brake Control Module, unconnect the negative battery cable from the battery. After that, lift on the ABM harness connector release and remove the connector from the airframe. After that, undo the screws holding the ABM to the HCU and disconnect the pump connector before pulling the ABM from the HCU.