How to Install the Drive Shaft on 2008 Dodge Sprinter 2500?

First, set the intermediate bearings in place and tighten the nuts to 105 Nm (77 ft. lbs.). After that, attach the intermediate bearing support/supports to the frame floor using bolts that are tightened to 95 Nm (70 ft. lbs.). If the vehicle's wheelbase is 3550 mm, add the intermediate bearing as well as both the retaining bracket and brake cable bracket. After that, link the propeller shaft to the back axle and transmission flange so the installation marks line up and secure the bolts at 70 Nm (66 ft. lbs.). After that, place the retaining bracket and tighten all bolts to 100 Nm (74 ft. lbs.).

OEM 2008 Dodge Sprinter 2500 Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Drive Shafts found

View related parts
2008 Dodge Sprinter 2500 Drive Shaft Part Number: 68056107AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 68056112AA, 68006640AA, 68006641AA, 68006658AA
- Item Weight: 10.40 Pounds
- Item Dimensions: 53.0 x 8.9 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68056107AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 2500 Submodels:
- Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 2500 Drive Shaft Part Number: 68138113AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 68006638AA, 68047594AA, 68056139AA
- Item Weight: 59.60 Pounds
- Item Dimensions: 105.8 x 10.1 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68138113AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 2500 Submodels:
- Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 2500 Drive Shaft Part Number: 68055987AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 68006622AA
- Item Weight: 95.90 Pounds
- Item Dimensions: 120.9 x 10.1 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68055987AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 2500 Submodels:
- Base | 3.0L V6, 6 Cyl 3.0 L DIESEL
View related parts
2008 Dodge Sprinter 2500 Drive Shaft Part Number: 68056147AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 68055991AA, 68006632AA
- Item Weight: 87.40 Pounds
- Item Dimensions: 121.1 x 9.9 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68056147AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 2500 Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS

2008 Dodge Sprinter 2500 Drive Shaft Parts and Q&A

Q: How to Install the Drive Shaft on 2008 Dodge Sprinter 2500?
A: First, set the intermediate bearings in place and tighten the nuts to 105 Nm (77 ft. lbs.). After that, attach the intermediate bearing support/supports to the frame floor using bolts that are tightened to 95 Nm (70 ft. lbs.). If the vehicle's wheelbase is 3550 mm, add the intermediate bearing as well as both the retaining bracket and brake cable bracket. After that, link the propeller shaft to the back axle and transmission flange so the installation marks line up and secure the bolts at 70 Nm (66 ft. lbs.). After that, place the retaining bracket and tighten all bolts to 100 Nm (74 ft. lbs.).