Other Name: Latch - Front Door; Door Latch Assembly, Front Left; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Latch; Latch Front Door; Door Latch Assembly
Position: Front Driver Side
Replaces: 68010012AA
Item Weight: 2.60 Pounds
Item Dimensions: 11.0 x 10.6 x 5.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68017889AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
Other Name: Latch - Front Door; Door Latch Assembly, Front Right; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Latch; Latch Front Door; Door Latch Assembly
Position: Front Passenger Side
Replaces: 68010100AA
Item Weight: 1.90 Pounds
Item Dimensions: 10.2 x 9.5 x 4.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68017891AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
Other Name: Latch - Cargo Door; Sliding Door Latch; Door Lock Actuator Motor; Door Latch Assembly; Door Lock Actuator; Door Lock; Latch; Latch Cargo Door
Item Weight: 0.40 Pounds
Item Dimensions: 5.1 x 4.2 x 3.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5104357AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
Base | 5 Cyl 2.7 L DIESEL, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
Other Name: Latch - Rear Door; Door Latch Assembly, Rear Right Lower; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Lock; Latch Rear Door Includes Cable And Actuator; Door Latch Assembly
Position: Rear Lower Passenger Side
Item Weight: 2.50 Pounds
Item Dimensions: 13.5 x 13.4 x 6.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68017888AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
2008 Dodge Sprinter 3500 Door Latch Assembly Parts and Q&A
Q: How to Service and Repair the Right Rear Door Latch Assembly on 2008 Dodge Sprinter 3500?
A: First, install the door latch (3) inside the rear end door, then connect the electrical connector. Then, connect the cable (12) from the handle of the outer door with the door latch (3) which has the cable (13). Turn the whole thing counterclockwise as you press it into the middle of the door. While installing, lead the cable (16) above the upper door latch so you don't damage the rattling protection. Guide each cable (13) into the door handle (7) so they are placed safely within and do not twist or fold. Fix the door latch (3) to the wall using bolts (2) and tighten them to 10 Nm (90 in. lbs.). Fix the lock cylinder rod to the lock cylinder (11) and tie down the release lever (10). Carefully attach the upper door latch (1), inside door handle (7), lower door trim (6) and upper door trim (8). When required, change the settings on the door latch (2). To install the upper door latch, run cable (3) to it, fit it into place and attach with bolts (1), after making sure the tightening force is 10 Nm (90 in. lbs.). If the latch seems off, adjust it accordingly.