How to Remove an Engine Control Module on 2008 Dodge Sprinter 3500?

First, unhook the negative battery cable before taking out the Engine Control Module. After that, take out the connectors from the ECM harness. Afterward, take a hold of the ECM and pull steadily up to separate it from the bracket. When a new ECM is put in, a scan tool is required to enter the car's specific programming into the new ECM.

OEM 2008 Dodge Sprinter 3500 Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Engine Control Modules found

View related parts
2008 Dodge Sprinter 3500 PCM Part Number: 68056342AA
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM
- Replaces: 68051416AA, 68028085AA, 68018165AA, 68018164AA, 68028085AB
- Item Weight: 2.80 Pounds
- Item Dimensions: 10.1 x 10.2 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68056342AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 3.0L V6, 6 Cyl 3.0 L DIESEL
View related parts
2008 Dodge Sprinter 3500 PCM Part Number: 68051413AA
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM
- Replaces: 68039086AA, 68022860AA
- Item Weight: 2.50 Pounds
- Item Dimensions: 8.8 x 8.2 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68051413AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS

2008 Dodge Sprinter 3500 Engine Control Module Parts and Q&A

Q: How to Remove an Engine Control Module on 2008 Dodge Sprinter 3500?
A: First, unhook the negative battery cable before taking out the Engine Control Module. After that, take out the connectors from the ECM harness. Afterward, take a hold of the ECM and pull steadily up to separate it from the bracket. When a new ECM is put in, a scan tool is required to enter the car's specific programming into the new ECM.