How to Remove the Tail Light from a Sedan or Wagon on 2009 Chrysler 300?

First, you should isolate and remove the battery's negative cable before taking out the tail lamp from a sedan. On the trunk side, pull back the trim panel and then remove the electrical connector. Pull the three plastic wing nuts free, then remove the tail lamp unit by taking it out from the rear of the quarter trim panel. When working on a wagon, start by taking out the battery negative cable and then remove the rapidly detachable fasteners by the liftgate. Use a trim stick or its equivalent from the cargo area to take off the access panel fixed to the quarter panel's backside. Lift the one plastic wing nut and carefully pull the rear section to release both mounting tabs of the tail lamp unit. Loop the electrical connector out of the tail lamp unit, then turn it counterclockwise to remove the Stop, Turn Signal or back up lamps.

OEM 2009 Chrysler 300 Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Tail Lights found

View related parts
2009 Chrysler 300 Tail Lamp Assembly, Driver Side Part Number: 4806371AD
$183.05 MSRP: $274.00
You Save: $90.95 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Assembly, Left; Tail Lamp - Driver Side; Back Up Light; Stop Light; Lamp Tail Stop Turn; Tail Light Assembly; Tail Light
- Position: Driver Side
- Replaces: 4806371AC, 4806371AA, 4806371AB
- Item Weight: 4.00 Pounds
- Item Dimensions: 14.0 x 13.9 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4806371AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- LX, Limited, Signature Series, Touring | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Chrysler 300 Tail Lamp Assembly, Passenger Side Part Number: 4806380AC
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Assembly, Right; Back Up Light; Lamp Tail Stop Turn; Tail Light
- Position: Passenger Side
- Replaces: 4806380AB, 4806380AA
- Item Weight: 4.70 Pounds
- Item Dimensions: 15.5 x 10.4 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4806380AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- C, C SRT8, S | 5.7L V8, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Chrysler 300 Tail Lamp Assembly, Driver Side Part Number: 4806381AC
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Assembly, Left; Back Up Light; Lamp Tail Stop Turn; Tail Light
- Position: Driver Side
- Replaces: 4806381AA, 4806381AB
- Item Weight: 4.10 Pounds
- Item Dimensions: 15.7 x 9.8 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4806381AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- C, C SRT8, S | 5.7L V8, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Chrysler 300 Tail Lamp Assembly, Passenger Side Part Number: 4806370AD
Product Specifications
- Other Name: Lamp - Tail Stop Turn; Tail Light Assembly, Right; Tail Lamp - Passenger Side; Back Up Light; Stop Light; Lamp Tail Stop Turn; Tail Light Assembly; Tail Light
- Position: Passenger Side
- Replaces: 4806370AB, 4806370AA, 4806370AC
- Item Weight: 3.70 Pounds
- Item Dimensions: 20.8 x 15.3 x 14.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4806370AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- LX, Limited, Signature Series, Touring | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2009 Chrysler 300 Tail Light Parts and Q&A

Q: How to Remove the Tail Light from a Sedan or Wagon on 2009 Chrysler 300?
A: First, you should isolate and remove the battery's negative cable before taking out the tail lamp from a sedan. On the trunk side, pull back the trim panel and then remove the electrical connector. Pull the three plastic wing nuts free, then remove the tail lamp unit by taking it out from the rear of the quarter trim panel. When working on a wagon, start by taking out the battery negative cable and then remove the rapidly detachable fasteners by the liftgate. Use a trim stick or its equivalent from the cargo area to take off the access panel fixed to the quarter panel's backside. Lift the one plastic wing nut and carefully pull the rear section to release both mounting tabs of the tail lamp unit. Loop the electrical connector out of the tail lamp unit, then turn it counterclockwise to remove the Stop, Turn Signal or back up lamps.