How to Detach the Antenna Cable from the Instrument Panel on 2009 Chrysler Aspen?

To begin, break the negative battery cable from its socket and cover the battery terminals. After that, take out the trim around the floor on the right side. Reach past the glove box on the driver's side and find the coaxial cable connector for the antenna on the instrument panel. Pull the cable apart while twisting both metal halves, keeping the actual cable out of your hands. Remove the instrument panel antenna cable from the plastic clips on the glove box opening and lower shield. Since pulling the cable straight could damage the radio or antenna, you should unlock the antenna connector before you remove the radio. Take out the antenna cable next by pulling the locking antenna connector off the radio and pulling the antenna cable through the car's instrument panel opening.

OEM 2009 Chrysler Aspen Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Antenna Cables found

View related parts
2009 Chrysler Aspen Antenna Cable Part Number: 5064608AA
Product Specifications
- Other Name: Cable - Antenna; Cable Antenna
- Item Weight: 0.60 Pounds
- Item Dimensions: 11.4 x 9.5 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5064608AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler Aspen Cable Part Number: 5064367AD
Product Specifications
- Other Name: Cable - Satellite Radio; Antenna Cable
- Replaces: 5064367AC, 5064367AB
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5064367AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler Aspen Cable Part Number: 5064365AB
Product Specifications
- Other Name: Wiring - Satellite Radio; Antenna Cable; Cable Satellite Radio
- Replaces: 5064365AA
- Item Weight: 2.70 Pounds
- Item Dimensions: 12.5 x 8.8 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5064365AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited Hybrid | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV)

2009 Chrysler Aspen Antenna Cable Parts and Q&A

Q: How to Detach the Antenna Cable from the Instrument Panel on 2009 Chrysler Aspen?
A: To begin, break the negative battery cable from its socket and cover the battery terminals. After that, take out the trim around the floor on the right side. Reach past the glove box on the driver's side and find the coaxial cable connector for the antenna on the instrument panel. Pull the cable apart while twisting both metal halves, keeping the actual cable out of your hands. Remove the instrument panel antenna cable from the plastic clips on the glove box opening and lower shield. Since pulling the cable straight could damage the radio or antenna, you should unlock the antenna connector before you remove the radio. Take out the antenna cable next by pulling the locking antenna connector off the radio and pulling the antenna cable through the car's instrument panel opening.