How to Remove and Replace the Drive Belt on a 2.7L Engine on 2009 Dodge Charger?

Before taking off the serpentine drive belt, look at the health of the pulleys attached to the engine. Proper belt routing is necessary when fitting the engine to avoid overheating caused by a wrong water pump rotation. Reach the accessory drive belt around the many pulleys in your engine, excluding the idler pulley. Make sure the tensioner arm touches its end point all the way around, then run the belt around the idler pulley and help the tensioner arm settle down over every pulley. For a new belt, set the indexing tang about 6 - 8mm (0.24 - 0.32 in.) beyond the indexing stop on the housing, as long as the belt is used for less than 15 minutes. When the installation is complete, look at the belt wear indicator.

OEM 2009 Dodge Charger Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Drive Belts found

View related parts
2009 Dodge Charger Serpentine Belt Part Number: 4593684AA
$54.38 MSRP: $73.70
You Save: $19.32 (27%)
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 4861322AC, 68060352AA, 4892840AA
- Item Weight: 0.90 Pounds
- Item Dimensions: 1.1 x 6.2 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593684AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SXT | 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Charger Serpentine Belt Part Number: 4593685AA
$42.58 MSRP: $63.35
You Save: $20.77 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine; Belt
- Replaced by: 4593685AB
- Item Weight: 1.30 Pounds
- Item Dimensions: 15.5 x 12.6 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593685AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Charger Submodels:
- Base, SE | 6 Cyl 2.7 L GAS
View related parts
2009 Dodge Charger Serpentine Belt Part Number: 5037542AA
$78.83 MSRP: $118.00
You Save: $39.17 (34%)
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine; Belt
- Item Weight: 2.10 Pounds
- Item Dimensions: 18.8 x 6.8 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037542AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Charger Submodels:
- Pursuit, SE, SRT8, SXT | 6 Cyl 3.5 L GAS, 8 Cyl 6.1 L GAS

2009 Dodge Charger Drive Belt Parts and Q&A

Q: How to Remove and Replace the Drive Belt on a 2.7L Engine on 2009 Dodge Charger?
A: Before taking off the serpentine drive belt, look at the health of the pulleys attached to the engine. Proper belt routing is necessary when fitting the engine to avoid overheating caused by a wrong water pump rotation. Reach the accessory drive belt around the many pulleys in your engine, excluding the idler pulley. Make sure the tensioner arm touches its end point all the way around, then run the belt around the idler pulley and help the tensioner arm settle down over every pulley. For a new belt, set the indexing tang about 6 - 8mm (0.24 - 0.32 in.) beyond the indexing stop on the housing, as long as the belt is used for less than 15 minutes. When the installation is complete, look at the belt wear indicator.