How to Properly Install an Emblem on 2009 Dodge Grand Caravan?

To install the nameplate, clean the areas of attachment with a solution of water and alcohol in a 1 to 1 ratio and dry. Do not exceed 52°C/120°F when heating. If below 21°C (70°F), warm the nameplate. Remove the covering of protection, place with guide tape, and exert uniform pressure of about 40 psi for adhesion.

OEM 2009 Dodge Grand Caravan Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Emblem found

View related parts
2009 Dodge Grand Caravan Nameplate, Rear Part Number: 55157216AB
$61.15 MSRP: $77.60
You Save: $16.45 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hatch Emblem, Rear
- Position: Rear
- Replaces: 55157216AA
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55157216AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Grand Caravan Submodels:
- SXT | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 4.0 L GAS

2009 Dodge Grand Caravan Emblem Parts and Q&A

Q: How to Properly Install an Emblem on 2009 Dodge Grand Caravan?
A: To install the nameplate, clean the areas of attachment with a solution of water and alcohol in a 1 to 1 ratio and dry. Do not exceed 52°C/120°F when heating. If below 21°C (70°F), warm the nameplate. Remove the covering of protection, place with guide tape, and exert uniform pressure of about 40 psi for adhesion.