Other Name: Arm - Intake; Rocker Arm; Exhaust Rocker Arms; Arm Assembly, Left Intake Rocker; Rocker Arm Intake
Item Weight: 0.80 Pounds
Item Dimensions: 1.9 x 2.6 x 3.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4573459
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Grand Caravan Submodels:
SXT | 6 Cyl 4.0 L GAS
2009 Dodge Grand Caravan Rocker Arm Parts and Q&A
Q: How to Install a Rocker Arm Assembly on 2009 Dodge Grand Caravan?
A: The key is to first secure the long bolt on the rocker shaft before fitting the valve rocker arm assembly. Set both the rocker arm and shaft groups onto the supporting mounts, confirming all pushrods are in the right place on the lifter and socket. Be sure that each rocker arm socket is precisely located by the pushrod end. Tighten each rocker arm shaft bolt evenly, beginning with those at the center of the valve and then wait 20 minutes for the lifters to empty before you start the engine. Screw the bolts on the rocker shaft a little bit tighter with a maximum torque of 23 Nm (200 in. lbs.) until the shaft is totally seated. Remember to install your cylinder head covers when all is set in the engine compartment.