Other Name: Hinge - Front Door Lower; Door Hinge, Front Left Lower, Front Lower, Front Right Lower; Hinge Front Door Lower Lower; Hinge Front Door Lower; Hinge Door Lower; Hinge Door; Door Hinge
Position: Front Lower
Replaces: 55112146AA, 55112147AA
Item Weight: 2.30 Pounds
Item Dimensions: 6.7 x 4.6 x 3.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55275634AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
Other Name: Hinge - Rear Door Lower; Door Hinge, Rear Left Lower; Hinge Rear Door Lower; Hinge Door Half; Door Hinge
Position: Rear Lower Driver Side
Item Weight: 2.40 Pounds
Item Dimensions: 6.6 x 5.1 x 4.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55277083AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
2009 Dodge Ram 2500 Door Hinge Parts and Q&A
Q: How to Install a Rear Door Hinge on 2009 Dodge Ram 2500?
A: The rear upper door hinge should be installed beginning with the washers, then secured with bolt (1) and nut (9) to 28 Nm (21 ft. lbs.). After that, tighten bolts (2), (1) and (3) at the upper hinges to 28 Nm (21 ft. lbs.) and readjust the door if needed. Put the lower hinge and B-pillar bolts into place, then tighten the upper hinge bolts (2), (1) and (3) to 28 Nm (21 ft. lbs.) apiece. Replace the hinge to door washers if you took them off, secure them with nut and bolt and tighten the assembly to 28 Nm (21 ft. lbs.). Make any adjustments to the door and then set in the lower B-pillar trim.