How to Service and Repair a Clutch Slave Cylinder on 2009 Jeep Compass?

Make sure the brake master cylinder fluid is full and close the reservoir cap tightly to stop the clutch master cylinder fluids from leaking out during removal. Start by taking out the transaxle from the vehicle. You will then separate the clutch hydraulic line (6) from the bleeder assembly (2) and then pull out and take off the bleeder assembly (2) from the clutch master cylinder (3). After that, take out the slave cylinder-to-clutch bellhousing bolts and remove the slave cylinder from the transaxle.

OEM 2009 Jeep Compass Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clutch Slave Cylinder found

View related parts
2009 Jeep Compass Slave Cylinder Part Number: 5273431AB
$96.39 MSRP: $212.00
You Save: $115.61 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Hydraulic Clutch; Release Bearing; Actuator Hydraulic Clutch Slave Cylinder; Actuator Hydraulic Clutch; Cylinder Clutch Slave
- Replaces: 5273431AA
- Item Weight: 1.00 Pounds
- Item Dimensions: 2.6 x 0.3 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5273431AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Compass Submodels:
- 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2009 Jeep Compass Clutch Slave Cylinder Parts and Q&A

Q: How to Service and Repair a Clutch Slave Cylinder on 2009 Jeep Compass?
A: Make sure the brake master cylinder fluid is full and close the reservoir cap tightly to stop the clutch master cylinder fluids from leaking out during removal. Start by taking out the transaxle from the vehicle. You will then separate the clutch hydraulic line (6) from the bleeder assembly (2) and then pull out and take off the bleeder assembly (2) from the clutch master cylinder (3). After that, take out the slave cylinder-to-clutch bellhousing bolts and remove the slave cylinder from the transaxle.