How to Install a Harmonic Balancer on 2009 Jeep Patriot?

Installation of the harmonic balancer starts by putting it over the crankshaft. Then, coat each thread of the harmonic balancer bolt and rub engine oil between the head and the washer. Use a torque wrench and tighten the bolt until you reach 210 Nm (155 ft. lbs.). At this point, fit the accessory drive belts as directed in the instructions for drive belts, mounts, brackets and accessories.

OEM 2009 Jeep Patriot Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Harmonic Balancer found

View related parts
2009 Jeep Patriot Crankshaft Pulley Part Number: 2312425000
$262.86 MSRP: $391.00
You Save: $128.14 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper - Crankshaft; Engine Crankshaft Pulley; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Damper; Damper Crankshaft
- Item Weight: 4.90 Pounds
- Item Dimensions: 4.0 x 8.2 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2312425000
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Patriot Submodels:
- 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2009 Jeep Patriot Harmonic Balancer Parts and Q&A

Q: How to Install a Harmonic Balancer on 2009 Jeep Patriot?
A: Installation of the harmonic balancer starts by putting it over the crankshaft. Then, coat each thread of the harmonic balancer bolt and rub engine oil between the head and the washer. Use a torque wrench and tighten the bolt until you reach 210 Nm (155 ft. lbs.). At this point, fit the accessory drive belts as directed in the instructions for drive belts, mounts, brackets and accessories.