How is the Starter Motor Installed on 2009 Jeep Patriot?

Installation of the starter motor -Connect the wiring and tighten the battery cable nut to 10 Nm. Install the motor in the engine compartment loosely and then screw it with bolts at 54 Nm. Attach throttle body, electrical connector, air cleaner box, inlet tube and battery negative cable.

OEM 2009 Jeep Patriot Starter Motor

Starter Ignition

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Starter motors found

View related parts
2009 Jeep Patriot Starter Part Number: 5034555AA
$263.30 MSRP: $390.00
You Save: $126.70 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Motor Reman; Starters; Starter Engine
- Item Weight: 6.50 Pounds
- Item Dimensions: 6.7 x 6.4 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5034555AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Patriot Submodels:
- 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Jeep Patriot Starter Part Number: R5034555AA
$116.01 MSRP: $135.00
You Save: $18.99 (15%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Item Weight: 6.40 Pounds
- Item Dimensions: 10.5 x 7.4 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: R5034555AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Patriot Submodels:
- 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2009 Jeep Patriot Starter Motor Parts and Q&A

Q: How is the Starter Motor Installed on 2009 Jeep Patriot?
A: Installation of the starter motor -Connect the wiring and tighten the battery cable nut to 10 Nm. Install the motor in the engine compartment loosely and then screw it with bolts at 54 Nm. Attach throttle body, electrical connector, air cleaner box, inlet tube and battery negative cable.