Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Fits the following 2010 Chrysler Town & Country Submodels:
30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.6L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Fits the following 2010 Chrysler Town & Country Submodels:
30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2010 Chrysler Town & Country Submodels:
LX, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
2010 Chrysler Town & Country Seat Switch Parts and Q&A
Q: How to Service and Repair the D-Pillar Power Seat Switch on 2010 Chrysler Town & Country?
A: Before starting the service or repair on the power seat switch in the D-Pillar, disconnect the negative battery cable. After that, pull out the C-4755 trim stick or a different tool to detach the switch and bezel of the third row power folding seat from the upper D-Pillar panel. With that done, unhook the switch connector and take the switch out of your vehicle.