Other Name: Switch - Deck Lid Release; Trunk Lid Release; Liftgate Release; Door Lock Switch; Release Switch; Trunk Switch; Trunk Lid Switch; Switch; Switch Deck Lid Release
Position: Front
Item Weight: 0.40 Pounds
Item Dimensions: 1.2 x 1.1 x 2.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4760847AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2010 Dodge Avenger Submodels:
Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
Other Name: Switch - Window And Door Lock; Door Window Switch, Front Left; Switch Window And Door Lock Left Hand Drive; Switch Window And Door Lock; Door Window Switch
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2010 Dodge Avenger Submodels:
Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 2.4L L4, 2.7L V6, 3.5L V6, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
2010 Dodge Avenger Door Lock Switch Parts and Q&A
Q: How to Install a Door Lock Switch on a Door Lock Cylinder on 2010 Dodge Avenger?
A: First, join the Door Lock Switch to the door lock cylinder. Following that, attach the wiring clip and pigtail wire connector. Following this, add the door trim panel. After that, attach the negative side of the battery to the chassis.