How to Service a Camshaft Position Sensor on 3.3/3.8L Engines on 2010 Dodge Grand Caravan?

To service the Camshaft Position Sensor on 3.3/3.8L engines, disconnect the negative battery cable, remove the air box cover and inlet tube, then disconnect the CMP sensor's electrical connector. Loosen the retaining bolt and pull the sensor out of the chain case cover, leaving the bolt in place.

OEM 2010 Dodge Grand Caravan Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
2010 Dodge Grand Caravan Camshaft Position Sensor Part Number: 5149078AD
$163.52 MSRP: $226.00
You Save: $62.48 (28%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Cam Sensor; Sensor Camshaft
- Replaces: 5149078AB, 5149078AA, 5149078AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.7 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149078AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Grand Caravan Submodels:
- C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
2010 Dodge Grand Caravan Crankshaft Position Sensor Part Number: 5029808AD
Product Specifications
- Other Name: Engine Camshaft Position Sensor; Camshaft Position Sensor; Sensor Camshaft
- Replaces: 68013184AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.4 x 2.0 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5029808AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Grand Caravan Submodels:
- SXT | 6 Cyl 4.0 L GAS

2010 Dodge Grand Caravan Camshaft Position Sensor Parts and Q&A

Q: How to Service a Camshaft Position Sensor on 3.3/3.8L Engines on 2010 Dodge Grand Caravan?
A: To service the Camshaft Position Sensor on 3.3/3.8L engines, disconnect the negative battery cable, remove the air box cover and inlet tube, then disconnect the CMP sensor's electrical connector. Loosen the retaining bolt and pull the sensor out of the chain case cover, leaving the bolt in place.