How to Install an Emblem on the Body on Chrysler Aspen?

Before attaching the body emblem, take the carrier off the adhesive tape found on its backside. Then, correctly place the emblem on the body and press down with your palm. If it's below 21°C (70°F) in the area, heat the emblem using a heat lamp or gun to avoid any issues with adhesion, but do not let the temperature go over 52°C (125°F).

How to Detach the Exterior Emblem on Chrysler Aspen?

Place masking tape along the body of the car, running next to the top edge of the nameplate. If it's cooler than 21°C (70°F), put the emblem under a heat lamp or heat gun, but don't let the temperature rise above 52°C (120°F). After that, place a plastic trim stick or hard wood wedge behind the emblem to remove the adhesive from the body. At the end, scrub any adhesive off the body with Mopar® Super Kleen solvent or a similar cleaner.

OEM Chrysler Aspen Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Emblems found

View related parts
Chrysler Aspen Nameplate, Rear Part Number: 68041068AB
Product Specifications
- Other Name: Hatch Emblem, Rear
- Position: Rear
- Replaces: 68041068AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Chrysler Aspen | Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chrysler Aspen Nameplate Part Number: 68032307AB
Product Specifications
- Replaces: 68032307AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Chrysler Aspen | Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV)

Chrysler Aspen Emblem

Choose OEM Emblem that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Emblem follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Aspen Emblem Parts and Q&A

Nameplate, Rear
68041068AB
Q: How to Install an Emblem on the Body on Chrysler Aspen?
A:
Before attaching the body emblem, take the carrier off the adhesive tape found on its backside. Then, correctly place the emblem on the body and press down with your palm. If it's below 21°C (70°F) in the area, heat the emblem using a heat lamp or gun to avoid any issues with adhesion, but do not let the temperature go over 52°C (125°F).
Nameplate
68032307AB
Q: How to Detach the Exterior Emblem on Chrysler Aspen?
A:
Place masking tape along the body of the car, running next to the top edge of the nameplate. If it's cooler than 21°C (70°F), put the emblem under a heat lamp or heat gun, but don't let the temperature rise above 52°C (120°F). After that, place a plastic trim stick or hard wood wedge behind the emblem to remove the adhesive from the body. At the end, scrub any adhesive off the body with Mopar® Super Kleen solvent or a similar cleaner.