How to Replace and Install a Seat Cushion for the Front Seat on Chrysler Crossfire?

The seat cushion components cannot be replaced by themselves and when replacement occurs, the complete service kit consisting of the seat cushion, bladder/sensor, OCM and new wiring harness is required. First, set up your plate springs and have the springs' narrow coils face downwards, then place them in the shell cushion's humps. Move the seat cushion back and connect it in front to the frame; remember, the connection leads need to be inserted into the connector the same way as your existing leads. If the heated seat cushion is provided, link the leads to the 4-pin connector. Remember, you should not keep the old anchors and bearing brackets when ordering the replacement. Installing the two expanding anchors comes before the installation of the front left and right bearing bracket bolts. After that, put in the front seat.

OEM Chrysler Crossfire Seat Cushion

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Seat Cushion found

View related parts
Chrysler Crossfire Seat Cushion Pad Part Number: 5103241AA
Product Specifications
- Other Name: Foam - Seat Cushion; Foam Seat Cushion Includes Side Heated Pads; Foam Seat Cushion; Seat Cushion
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

Chrysler Crossfire Seat Cushion

Choose OEM Seat Cushion that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Seat Cushion follows strict manufacturing steps to lock in quality and fit. If your Chrysler Crossfire matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Crossfire parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Crossfire Seat Cushion is a highly relevant part that greatly improves the drive in cars that belong to the Chrysler Crossfire series that for some reason are distinguished by a combination of performance and design. Intended to correct some of the most frequently observed faults including lack of support and soreness when driving for many hours, the Seat Cushion enhances basic need by reducing physical pressure on trigger points that cause tiredness and discomfort in the back. It is also possible to purchase different types of materials for the Chrysler Crossfire Seat Cushion: beaded and sheepskin have their peculiarities. The beaded design enhances circulation by allowing air through it to heat and cool the back, hips, and thighs; On the other hand, the sheepskin design is suitable for driver's different climate conditions since it can regulate temperatures. Besides, this attention to comfort is not only beneficial to the overall efficiency of the Chrysler Crossfire, but is also very important in eliminating the chances of the driver being distracted by discomfort. Designed to fit various Crossfire models, the Seat Cushion is a reliable and high-performing product in the automotive industry which make it a go-to choice among those using their cars for performance, racing, and daily use. This work examines the Chrysler crossfire seat cushion; the design of this product and the materials used in manufacture reflects the companies'unquestionable aim and commitment in providing an exceptional and safe driving experience thus affirming the Chrysler brand reputation for quality, innovation and functionality in comfort design for car users.

Chrysler Crossfire Seat Cushion Parts and Q&A

Seat Cushion Pad
5103241AA
Q: How to Replace and Install a Seat Cushion for the Front Seat on Chrysler Crossfire?
A:
The seat cushion components cannot be replaced by themselves and when replacement occurs, the complete service kit consisting of the seat cushion, bladder/sensor, OCM and new wiring harness is required. First, set up your plate springs and have the springs' narrow coils face downwards, then place them in the shell cushion's humps. Move the seat cushion back and connect it in front to the frame; remember, the connection leads need to be inserted into the connector the same way as your existing leads. If the heated seat cushion is provided, link the leads to the 4-pin connector. Remember, you should not keep the old anchors and bearing brackets when ordering the replacement. Installing the two expanding anchors comes before the installation of the front left and right bearing bracket bolts. After that, put in the front seat.