Disconnect the negative cable from the battery, separate it from the remaining cables and then remove the front door trim, after that the speaker's fasteners. Take the speaker out by first disconnecting the harness connector. To get to the instrument panel speaker, disconnect and separate the black
Battery Cable, remove the grill covering the speaker, take off the mounting fasteners, remove the connector on the electrical harness and pull out the speaker. First, unconnect the negative battery terminal, then pull away the rear door panel, loosen the fasteners, unplug the wire connector and uninstall the speaker. For the subwoofer, take out the negative battery cable, then carefully lift the speaker grille with the special tool (C-4755) or something similar, remove the hold-downs, remove the wire harness and remove the speaker. Before the tweeter is removed, take out the negative cable from the battery, open the front door, remove the door trim panel, remove the tweeter mounting bolts, unplug the connector from the wire and remove the speaker.