How to Install a Hood Hinge on Chrysler Pacifica?

Painting the new hinge is necessary before attaching it to the hood. Connect the upper hood hinge to the hood and tighten it just enough so it doesn't loosen, then link the lower hood hinge to the cowl, again finger tight. Have the assistant on the opposite side give support and attach the pivot bolts and bushings, putting them in as you tighten the bolts to 28 Nm (250 in. lbs.) torque. Next, put the cowl plenum grille in place and make sure all alignment marks are aligned and all bolts are firmly tight. Make sure the hood can be operated correctly and that it is lined up, then tighten the hinge to body bolts to 9 Nm (80 in. lbs.) and the hinge to hood bolts to 14 Nm (120 in. lbs.). Shut the hood, take away your support and open and close the hood again to make sure everything is fine.

How to maintain and fix a Hood Hinge on Chrysler Pacifica?

You should hold open the hood on the side that has the damaged hinge when replacing or repairing it. After that, take off the cowl plenum grille and use a grease pencil or similar tool to mark each bolt and hinge place for easy installation. Once that's done, unscrew the pivot bolt and the pivot bushings and next remove the bolts securing the two hinge halves. After everything else is done, take off the hood upper or lower half or both halves and if everything requires a touch-up, paint the new hinge before you install it.

OEM Chrysler Pacifica Hood Hinge

Hood Bracket Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Hood Hinges found

View related parts
Chrysler Pacifica Hinge, Front Passenger Side Part Number: 5103484AC
$15.12 MSRP: $43.40
You Save: $28.28 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Package - Hood; Hood Hinge, Front Right; Hinge Hood
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Hinge, Front Driver Side Part Number: 68488455AA
$20.46 MSRP: $29.95
You Save: $9.49 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left; Hinge Hood
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Hinge, Front Passenger Side Part Number: 68488454AA
$20.37 MSRP: $29.95
You Save: $9.58 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right; Hinge Hood
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Hinge, Front Driver Side Part Number: 5103485AC
Product Specifications
- Other Name: Hinge Package - Hood; Hood Hinge, Front Left; Hinge Hood
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Hinge, Front Driver Side Part Number: 4719669AB
Product Specifications
- Other Name: Package Part - Hood Hood Half; Hood Hinge, Front Left
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chrysler Pacifica | Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Hinge, Front Passenger Side Part Number: 4719668AB
Product Specifications
- Other Name: Package Part - Hood Hood Half; Hood Hinge, Front Right
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chrysler Pacifica | Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Hinge, Front Passenger Side Part Number: 5054014AD
Product Specifications
- Other Name: Hinge - Hood Body Half; Hood Hinge, Front Right; Hinge Hood Body Half
- Position: Front Passenger Side
- Replaces: 5054014AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Hinge, Front Driver Side Part Number: 5054015AD
Product Specifications
- Other Name: Hinge - Hood Body Half; Hood Hinge, Front Left; Hinge Hood Body Half
- Position: Front Driver Side
- Replaces: 5054015AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

Chrysler Pacifica Hood Hinge

Choose OEM Hood Hinge that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Hood Hinge follows strict manufacturing steps to lock in quality and fit. If your Chrysler Pacifica matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Pacifica parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Pacifica Hood Hinge stands as a vital component which demonstrates reliable performance in all Chrysler Pacifica vehicles. Every Chrysler Pacifica hood comes standard with two hinges which both serve to support the hood while providing safe entry to the engine area. The continuous impact from use eventually deteriorates hood hinges thus requiring regular maintenance to ensure both vehicle safety and system efficiency. The versatility of the Chrysler Pacifica Hood Hinge extends across several Pacifica models because it enables the maintenance of vehicle structural integrity. Quick repairs of hood hinge replacements cost between $10 and $90 dollars because the installation remains simple so breakdown time stays brief. This hood hinge provides essential safety functions in addition to improving Chrysler Pacifica functionality because it blocks unexpected hood clearances. High market demand exists for Chrysler automobile Hood Hinges because of their reliable construction as well as their critical role in extended vehicle operation. The car hood hinge stands as an essential part of the car because it adds important value to this family-oriented vehicle which has won multiple awards in design and engineering categories. The car Hood Hinge demonstrates the automaker's dedication to quality by improving both product efficiency and safety standards of the model model.

Chrysler Pacifica Hood Hinge Parts and Q&A

Hinge, Front Driver Side
5103485AC
Q: How to Install a Hood Hinge on Chrysler Pacifica?
A:
Painting the new hinge is necessary before attaching it to the hood. Connect the upper hood hinge to the hood and tighten it just enough so it doesn't loosen, then link the lower hood hinge to the cowl, again finger tight. Have the assistant on the opposite side give support and attach the pivot bolts and bushings, putting them in as you tighten the bolts to 28 Nm (250 in. lbs.) torque. Next, put the cowl plenum grille in place and make sure all alignment marks are aligned and all bolts are firmly tight. Make sure the hood can be operated correctly and that it is lined up, then tighten the hinge to body bolts to 9 Nm (80 in. lbs.) and the hinge to hood bolts to 14 Nm (120 in. lbs.). Shut the hood, take away your support and open and close the hood again to make sure everything is fine.
Hinge, Front Passenger Side
5103484AC
Q: How to maintain and fix a Hood Hinge on Chrysler Pacifica?
A:
You should hold open the hood on the side that has the damaged hinge when replacing or repairing it. After that, take off the cowl plenum grille and use a grease pencil or similar tool to mark each bolt and hinge place for easy installation. Once that's done, unscrew the pivot bolt and the pivot bushings and next remove the bolts securing the two hinge halves. After everything else is done, take off the hood upper or lower half or both halves and if everything requires a touch-up, paint the new hinge before you install it.