How to Install a Liftgate Hinge on Chrysler Pacifica?

Apply the sealer on the trunk or liftgate hinge to the vehicle's body upon fitting to start the installation. Before putting the hinge in place, paint it if that is required. Set the hinge where it belongs on the vehicle and make sure it lines up with the marks on the liftgate. Fasten the bolts that attach the hinge to the liftgate, turning each to a tightness of 33 Nm (24 ft. lbs.). Then, ensure the hinge sits correctly on the marks on the roof header and bolt both nuts. Fasten them with less than 23 Nm (17 ft. lbs.) torque. After that, ensure the liftgate is properly aligned and put on the liftgate header trim panel.

How to Maintain and Fix a Liftgate Hinge on Chrysler Pacifica?

First, open the liftgate by releasing the latch and then work on the trunk or liftgate hinge. With the liftgate fully open, use a suitable machine to help hold it up. Draw a line on the cabinets to show where the hinges will be placed, using a grease pencil or its substitute. After that, eliminate the liftgate header trim panel and then pull out the nuts under the roof header that connect the liftgate hinge. Later, unbolt the hinge from the liftgate and finally remove it from your car.

OEM Chrysler Pacifica Liftgate Hinge

Luggage Compartment Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Liftgate Hinges found

View related parts
Chrysler Pacifica Hinge, Rear Driver Side Part Number: 5054701AB
$6.94 MSRP: $39.85
You Save: $32.91 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear Left; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Hinge, Rear Passenger Side Part Number: 5054700AB
$6.94 MSRP: $39.85
You Save: $32.91 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear Right; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Hinge, Rear Passenger Side Part Number: 68229150AE
$36.65 MSRP: $53.60
You Save: $16.95 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear Right; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear Passenger Side
- Replaces: 68229150AD, 68229150AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Hinge, Rear Driver Side Part Number: 68229151AE
$36.17 MSRP: $53.60
You Save: $17.43 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear Left; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear Driver Side
- Replaces: 68229151AC, 68229151AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)

Chrysler Pacifica Liftgate Hinge

Choose OEM Liftgate Hinge that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Liftgate Hinge follows strict manufacturing steps to lock in quality and fit. If your Chrysler Pacifica matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Pacifica parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Pacifica Liftgate Hinge Parts and Q&A

Hinge, Rear Driver Side
5054701AB
Q: How to Install a Liftgate Hinge on Chrysler Pacifica?
A:
Apply the sealer on the trunk or liftgate hinge to the vehicle's body upon fitting to start the installation. Before putting the hinge in place, paint it if that is required. Set the hinge where it belongs on the vehicle and make sure it lines up with the marks on the liftgate. Fasten the bolts that attach the hinge to the liftgate, turning each to a tightness of 33 Nm (24 ft. lbs.). Then, ensure the hinge sits correctly on the marks on the roof header and bolt both nuts. Fasten them with less than 23 Nm (17 ft. lbs.) torque. After that, ensure the liftgate is properly aligned and put on the liftgate header trim panel.
Hinge, Rear Passenger Side
5054700AB
Q: How to Maintain and Fix a Liftgate Hinge on Chrysler Pacifica?
A:
First, open the liftgate by releasing the latch and then work on the trunk or liftgate hinge. With the liftgate fully open, use a suitable machine to help hold it up. Draw a line on the cabinets to show where the hinges will be placed, using a grease pencil or its substitute. After that, eliminate the liftgate header trim panel and then pull out the nuts under the roof header that connect the liftgate hinge. Later, unbolt the hinge from the liftgate and finally remove it from your car.