How to Remove and Install a Grille on Chrysler Prowler?

First, open the bonnet, hold it up securely and take out the screws fixing the grille bracket to the front part and the screws joining the grille link rods to the isolator crossmember. To install, fit the grille's bottom tab into its corresponding front fascia slot, then screw the bracket to the front structure, tightening it to 3 N.m (30 in.lbs.) torque, finishing with the remaining screws for the grille onto the crossmember.

OEM Chrysler Prowler Grille

Front Grille

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Grille found

View related parts
Chrysler Prowler Grille, Front Part Number: PJ26TZZ
Product Specifications
- Other Name: Grille - Front Grille
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Prowler | Base | 6 Cyl 3.5 L GAS

Chrysler Prowler Grille

Choose OEM Grille that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Grille follows strict manufacturing steps to lock in quality and fit. If your Chrysler Prowler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Prowler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Prowler Grille Parts and Q&A

Grille, Front
PJ26TZZ
Q: How to Remove and Install a Grille on Chrysler Prowler?
A:
First, open the bonnet, hold it up securely and take out the screws fixing the grille bracket to the front part and the screws joining the grille link rods to the isolator crossmember. To install, fit the grille's bottom tab into its corresponding front fascia slot, then screw the bracket to the front structure, tightening it to 3 N.m (30 in.lbs.) torque, finishing with the remaining screws for the grille onto the crossmember.