How to Service and Repair Exterior Emblems on Chrysler Sebring?

Take time to draw dots or lines at the contact points before you start to take the name plates off. Use a heat gun and go around the affected area in small circles to soften the adhesive. Carefully lift the emblem by sticking a trim stick C 4755 or similar under the corners. After you have removed it, clean the panel of remaining adhesive with a general-purpose adhesive remover. When putting on the badges, start by cleaning the panel panel area with isopropyl alcohol and then place the badges on the points you've marked. Press the badge firmly into place, so it sticks well and wipe away any trace of where you placed the reference points.

How to Install the Emblem on Chrysler Sebring?

Lift the carrier off the adhesive strip at the back of the body emblem. After that, set the emblem in place on your body and press it hard with your palm. If the temperature is colder than 21°C (70°F), warm the emblem using a heat lamp or gun to make sure it sticks, making sure not to let it reach any higher than 52°C (120°F) during the heating.

OEM Chrysler Sebring Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Emblems found

View related parts
Chrysler Sebring Medallion, Front Part Number: 5288940AA
$33.77 MSRP: $71.35
You Save: $37.58 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ornament - Fascia; Bumper Cover Emblem, Front; Medallion Fascia Wing; Medallion Fascia
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chrysler Sebring | JX, JXi | 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Nameplate, Rear Part Number: 4805554AC
$30.71 MSRP: $46.25
You Save: $15.54 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nameplate - Lxi; Bumper Cover Emblem, Rear; Deck Lid Emblem, Rear; Hatch Emblem, Rear
- Position: Rear
- Replaces: MR478637, 4805554AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chrysler Sebring | Base, LX, LXi, Limited | 2.4L L4, 2.7L V6, 3.0L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Emblem Part Number: MR300116
$25.39 MSRP: $32.69
You Save: $7.30 (23%)
ADD TO CART
Product Specifications
- Other Name: Nameplate V 6
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Emblem Part Number: 5288164
Product Specifications
- Other Name: Ornament Chrysler Grille; Medallion, Grille; Medallion Grille
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1998 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Emblem, Front Part Number: 4805526AA
Product Specifications
- Other Name: Ornament - Fascia; Bumper Cover Emblem, Front; Medallion Fascia
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chrysler Sebring | Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Emblem, Front Part Number: 4805259AA
Product Specifications
- Other Name: Ornament - Fascia; Grille Emblem, Front; Medallion Fascia
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chrysler Sebring | Base, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Insulation Fastener Part Number: 6503274
Product Specifications
- Other Name: Nut - Push On; Insulation Retainer; Silencer Clip; Insulator Retainer; Nameplate Push On 500; Nameplate Push On
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Emblem, Rear Part Number: 4806083AB
Product Specifications
- Other Name: Ornament - Decklid; Deck Lid Emblem, Rear; Nameplate; Emblem Decklid Wing
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chrysler Sebring | Base, LX, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Medallion, Front Part Number: 5113607AB
Product Specifications
- Other Name: Emblem - Chrysler Wing; Hood Emblem, Front
- Position: Front
- Replaces: 5116124AC, 5113607AA, 5116124AD, 5116124AE, 5116124AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Chrysler Sebring Emblem

Choose OEM Emblem that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Emblem follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Sebring emblem represents the brand's dedication to reliability alongside performance by acting as the main identifier of vehicles from this manufacturer throughout their product lines. Lying on top of the hood and trunk as flat attachments or serving as a hood ornament the Chrysler emblem performs vital functions for identifying both vehicle brand and manufacturer identity. The Chrysler Sebring entered the market in 1995 and its look has transformed to reflect advancements in technology and changing customer needs. Throughout its development period the Sebring emblem has received different design formats and material approaches to improve its visual appeal without compromising its basic function. The emblem maintains its standardized representation of quality standards throughout every Sebring model within the product series. The Chrysler Sebring provides high efficiency and safety elements including full-length head curtain airbags and side-impact airbags resulting in its exceptional 5-star frontal safety rating. As a signifier of the Chrysler Sebring vehicle the emblem presents itself as an attention-grabbing icon which demonstrates both advanced motor capabilities alongside upscale cabin elements thus making it an attractive vehicle in automotive markets. The Chrysler model emblem represents a model which delivers comprehensive reliability benefits while providing high performance and safety features to become an industry-standard vehicle brand.

Chrysler Sebring Emblem Parts and Q&A

Emblem, Front
4805259AA
Q: How to Service and Repair Exterior Emblems on Chrysler Sebring?
A:
Take time to draw dots or lines at the contact points before you start to take the name plates off. Use a heat gun and go around the affected area in small circles to soften the adhesive. Carefully lift the emblem by sticking a trim stick C 4755 or similar under the corners. After you have removed it, clean the panel of remaining adhesive with a general-purpose adhesive remover. When putting on the badges, start by cleaning the panel panel area with isopropyl alcohol and then place the badges on the points you've marked. Press the badge firmly into place, so it sticks well and wipe away any trace of where you placed the reference points.
Medallion, Front
5113607AB
Q: How to Install the Emblem on Chrysler Sebring?
A:
Lift the carrier off the adhesive strip at the back of the body emblem. After that, set the emblem in place on your body and press it hard with your palm. If the temperature is colder than 21°C (70°F), warm the emblem using a heat lamp or gun to make sure it sticks, making sure not to let it reach any higher than 52°C (120°F) during the heating.