How to Properly Install an Emblem on Chrysler Town & Country?

First, make sure all residue is removed from the spots on the receiver where the nameplate will go. Use a clean, lint-free rag moistened with water and alcohol to wipe these areas and then immediately dry them with a dry, lint-free cloth. We mustn't get the temperature higher than 52°C (125°F) as too high a temperature when heating name plates, decals or body panels could damage them or the vehicle's paint. When the air temperature is lower than 21°C (70°F), apply heat to the name plate or decal and the body panel with a heat lamp or gun before fixing them. After that, take off the cover from the backside of the name plate or decal and apply it to the body with the previous guide tape. Use the same pressure of about 40 p.s.i. over all of the name plate or decal before installing it onto the vehicle.

How to Remove an Emblem on Chrysler Town & Country?

The first step before removing your nameplate or decal is to tape one end under the lower-side corner and the masking tape's length on the wood with the leading edge parallel to the name of what you are removing. Check that the air temperature should be no more than 52°C (120°F). Keep temperatures low when working on name plates, decals, or body painted parts to prevent harm to the finish on the vehicle or to the name plates or stickers. When it's lower than 21°C (70°F), heat the name plate or decal with a heat lamp or heat gun. The name plates for the outside are attached to the body by means of adhesive tape. Take off the name plate or decal from the body panel by using a trim stick C-4755 or anything similar that you might need.

OEM Chrysler Town & Country Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Emblems found

View related parts
Chrysler Town & Country Medallion, Gold, Front Part Number: 4805157
$67.70 MSRP: $99.65
You Save: $31.95 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ornament - Fascia; Grille Emblem, Front; Medallion Fascia
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Town & Country | Base, LX, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Emblem, Rear Part Number: 68081543AA
$75.46 MSRP: $112.00
You Save: $36.54 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Grille Emblem, Front; Hatch Emblem, Rear; Nameplate; Emblem Chrysler Grille Emblem
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Center Cap Part Number: 6ES82SZ0AA
$30.55 MSRP: $44.70
You Save: $14.15 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center
- Position: Center
- Replaces: 1LB74SZ0AB, 1LB74SZ0AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Center Cap Part Number: 1LB74SZ7AB
$49.31 MSRP: $72.15
You Save: $22.84 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center
- Position: Center
- Replaces: 1LB74SZ7AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2016 Chrysler Town & Country
- 2011 Chrysler Town & Country | 3.6L V6
View related parts
Chrysler Town & Country Medallion, Front Part Number: 4857406AA
$64.62 MSRP: $81.92
You Save: $17.30 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ornament - Winged Medallion; Grille Emblem, Front; Plinth Winged Medallion With Medallion; Plinth Winged Medallion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Nameplate, Rear Part Number: 5113423AC
$77.56 MSRP: $138.00
You Save: $60.44 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hatch Emblem, Rear
- Position: Rear
- Replaces: 5113423AA, 5113423AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | Touring, Touring Plus | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Emblem, Front Part Number: 4805797AA
$68.18 MSRP: $113.00
You Save: $44.82 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Medallion; Grille Emblem, Front; Hatch Emblem, Rear; Medallion Chrysler Light Bar Medallion; Medallion Radiator Grill
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Chrysler Town & Country | Limited, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Nameplate, Rear Part Number: 4805554AC
$30.71 MSRP: $46.25
You Save: $15.54 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nameplate - Lxi; Bumper Cover Emblem, Rear; Deck Lid Emblem, Rear; Hatch Emblem, Rear
- Position: Rear
- Replaces: MR478637, 4805554AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chrysler Town & Country | LXi | 3.3L V6, 3.5L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Emblem, Front Part Number: 68100696AA
$112.00 MSRP: $166.00
You Save: $54.00 (33%)
ADD TO CART
Product Specifications
- Other Name: Grille Emblem, Front; Emblem Winged Victory
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Nameplate, Rear Part Number: 55157216AB
$61.15 MSRP: $77.60
You Save: $16.45 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hatch Emblem, Rear
- Position: Rear
- Replaces: 55157216AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | Limited, Touring, Touring Plus | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Nameplate, Rear Part Number: 5113424AC
$89.89 MSRP: $128.00
You Save: $38.11 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hatch Emblem, Rear
- Position: Rear
- Replaces: 5113424AA, 5113424AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | Limited | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Decal Part Number: RJ51CA1AA
Product Specifications
- Other Name: Nameplate; Decal Liftgate All Wheel Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Town & Country | LX, LXi, Limited | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Decal Part Number: GU71MD2
Product Specifications
- Other Name: Decal Lift Gate AWD; Decal Or Nameplate, Liftgate Handle; Decal, Liftgate Handle; Decal, Liftgate
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993 Chrysler Town & Country | Base | 6 Cyl 3.3 L GAS
View related parts
Chrysler Town & Country Hub Cap, Black, Center Part Number: 5204001
Product Specifications
- Other Name: Cap Wheel Center; Cap; Cap, Domed Black, Used W/ (Wbd) Wheel; Cap, Black (Use W/14" Wheel); Cap, Domed Black; Cap, Black
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1995 Chrysler Town & Country | Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Medallion, Front Part Number: 4857810AA
Product Specifications
- Other Name: Ornament - Winged Medallion; Grille Emblem, Front; Plinth Winged Medallion With Medallion; Plinth Winged Medallion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chrysler Town & Country | Base, LX, Limited, Touring | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Ornament Part Number: 5017445AA
Product Specifications
- Other Name: Ornament - Hood
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1995 Chrysler Town & Country | Base | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Nameplate, Rear Part Number: 5113422AC
Product Specifications
- Other Name: Hatch Emblem, Rear
- Position: Rear
- Replaces: 5113422AB, 5113422AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | LX | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Emblem, Front Part Number: 5011615AA
Product Specifications
- Other Name: Ornament - Winged Medallion; Bumper Cover Emblem, Front; Grille Emblem, Front; Medallion; Plinth Winged Medallion Serviced In Grille Assembly; With Medallion; Plinth Winged Medallion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Town & Country | EL, EX, LX, LXi, Limited | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

Chrysler Town & Country Emblem

Choose OEM Emblem that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Emblem follows strict manufacturing steps to lock in quality and fit. If your Chrysler Town & Country matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Town & Country parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

As the central emblem of Chrysler's Town & Country presentage the brand reflects its dedication to automotive excellence through reliable performance capabilities. Its distinctive emblem appears either as a decorative hood ornament or flat surface attachment to the hood and trunk which functions as an important Chrysler marker and helps customers recognize all Town & Country vehicle versions. Throughout its development history the Town & Country Emblem has presented various design versions alongside diverse materials which strengthen both design beauty along with crucial brand recognition. As an efficient and safe product the Chrysler Town & Country brings together advanced safety features such as airbags along with all-wheel drive to provide an exceptional driving experience inside a roomy interior. The emblem gives consumers assurance about the manufacturer of their vehicle and particularly reinforces their trust in Chrysler during model rebadging. The Town & Country Emblem represents a stand-out choice in the automotive market through excellence in style combined with performance together with practical aspects which customers of all qualities find appealing. The Chrysler Town & Country keeps its position as an innovative minivan segment symbol because it combines its 119.1-inch wheelbase with powerful engine offerings to deliver superior capability and comfort.

Chrysler Town & Country Emblem Parts and Q&A

Nameplate, Rear
5113423AC
Q: How to Properly Install an Emblem on Chrysler Town & Country?
A:
First, make sure all residue is removed from the spots on the receiver where the nameplate will go. Use a clean, lint-free rag moistened with water and alcohol to wipe these areas and then immediately dry them with a dry, lint-free cloth. We mustn't get the temperature higher than 52°C (125°F) as too high a temperature when heating name plates, decals or body panels could damage them or the vehicle's paint. When the air temperature is lower than 21°C (70°F), apply heat to the name plate or decal and the body panel with a heat lamp or gun before fixing them. After that, take off the cover from the backside of the name plate or decal and apply it to the body with the previous guide tape. Use the same pressure of about 40 p.s.i. over all of the name plate or decal before installing it onto the vehicle.
Medallion, Gold, Front
4805157
Q: How to Remove an Emblem on Chrysler Town & Country?
A:
The first step before removing your nameplate or decal is to tape one end under the lower-side corner and the masking tape's length on the wood with the leading edge parallel to the name of what you are removing. Check that the air temperature should be no more than 52°C (120°F). Keep temperatures low when working on name plates, decals, or body painted parts to prevent harm to the finish on the vehicle or to the name plates or stickers. When it's lower than 21°C (70°F), heat the name plate or decal with a heat lamp or heat gun. The name plates for the outside are attached to the body by means of adhesive tape. Take off the name plate or decal from the body panel by using a trim stick C-4755 or anything similar that you might need.