How to Maintain Your Muffler for Optimal Performance on Dodge Avenger?

Always let the exhaust system cool before service, as its temperature near the catalytic converter can go very high. Band clamps should be spot welded alongside the exhaust system; any time you need to replace a band clamp, grind off the spot weld from the exhaust pipe. If changing any part of your exhaust system, use genuine parts or those designed to be the same. Lift the automobile on a hoist first and nerves apply oil to loosen band clamp 4. Take out the ground strap from the muffler and loosen band clamp 4. Remove the rubber isolators by hand and use soap or silicone spray to make it smoother, but don't use petroleum as it can hurt the rubber. Keep working by disconnecting the support isolators and getting rid of the muffler/resonator assembly.

How to Install a Muffler Assembly on Dodge Avenger?

The assembly should first be lined up over the opening of the catalytic converter pipe. After that, mount grip isolator 1 and check that the assembly remains aligned, so all support isolators share the same load. Latch the band clamp 4 to 54 Nm which equals 40 ft. lbs. Hold the ground wire to the muffler and after that drop the car down to the ground. Run the engine and check for any escaping exhaust, fixing them if you find any of these issues. At the end, check the exhaust system and fix any spots that make contact with the panels.

OEM Dodge Avenger Muffler

Exhaust Muffler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Mufflers found

View related parts
Dodge Avenger Muffler & Tail Pipe Part Number: 5171096AI
Product Specifications
- Other Name: Exhaust; Exhaust Muffler; Exhaust Pipe; Muffler; Muffler W/Tpipe
- Replaces: 5171096AE, 5171096AG, 5171096AD, 5171096AH, 5171096AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Avenger | R/T, SE, SXT | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Avenger Muffler & Tail Pipe Part Number: 5085559AK
Product Specifications
- Other Name: Exhaust; Exhaust Muffler; Exhaust Pipe; Muffler; Muffler W/Tpipe
- Replaces: 5085559AG, 5085559AF, 5085559AD, 5085559AE, 5085559AI, 5085559AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | SE, SXT | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Avenger Muffler & Tail Pipe Part Number: 52022293AF
Product Specifications
- Other Name: Exhaust; Exhaust Muffler; Exhaust Pipe; Muffler W/Tpipe; Muffler And Tailpipe Exhaust; Muffler
- Replaces: 52022293AC, 52022293AE, 52022293AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Avenger | Express, Lux, Mainstreet, SE, SXT | 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Muffler & Pipe Part Number: 5085741AM
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler & Tail Pipe; Muffler W/Tpipe; Muffler And Tailpipe Exhaust; Muffler
- Replaces: 5085741AI, 5085741AG, 5085741AK, 5085741AE, 5085741AH, 5085741AJ, 5085741AL, 5085741AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2014 Dodge Avenger | Express, Lux, Mainstreet, R/T, SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Muffler & Pipe Part Number: 5085556AL
Product Specifications
- Other Name: Exhaust Muffler and Pipe Assembly; Direct-Fit Exhaust System Kit; Resonator Assembly.; Muffler & Tail Pipe; Muffler W/Tpipe; Muffler And Tailpipe Exhaust; Muffler
- Replaces: 5085556AG, 5085556AH, 5085556AF, 5085556AI, 5085556AK, 5085556AJ, 5085556AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2014 Dodge Avenger | Express, Lux, Mainstreet, R/T, SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Muffler & Pipe Part Number: 52022289AF
Product Specifications
- Other Name: Exhaust; Exhaust Pipe; Muffler; Muffler & Tail Pipe; Muffler W/Tpipe; Muffler And Tailpipe Exhaust
- Replaces: 52022289AC, 52022289AD, 52022289AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Dodge Avenger | SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Muffler & Tail Pipe Part Number: 5085482AN
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Pipe; Muffler; Muffler W/Tpipe
- Replaces: 5085482AM, 5085482AH, 5085482AJ, 5085482AK, 5085482AL, 5085482AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | R/T | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Dodge Avenger Muffler & Tail Pipe Part Number: 5171098AK
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Pipe; Muffler; Muffler W/Tpipe
- Replaces: 5171098AI, 5171098AH, 5171098AJ, 5171098AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Avenger | R/T | 6 Cyl 3.5 L GAS
View related parts
Dodge Avenger Muffler & Tail Pipe Part Number: 52022316AE
Product Specifications
- Other Name: Exhaust; Exhaust Muffler; Exhaust Pipe; Muffler W/Tpipe; Muffler And Tailpipe Exhaust; Muffler
- Replaces: 52022316AD, 52022316AB, 52022316AA, 52022316AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Avenger | SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Muffler & Tail Pipe Part Number: 52022287AH
Product Specifications
- Other Name: Exhaust; Exhaust Muffler; Exhaust Pipe; Muffler W/Tpipe; Muffler And Tailpipe Exhaust; Muffler
- Replaces: 52022287AE, 52022287AF, 52022287AG, 52022287AC, 52022287AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Avenger | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 6 Cyl 3.6 L FLEX
View related parts
Dodge Avenger Muffler & Tail Pipe Part Number: 5171095AM
Product Specifications
- Other Name: Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Exhaust Pipe; Muffler W/Tpipe; Muffler And Tailpipe Exhaust; Muffler
- Replaces: 5171095AE, 5171095AK, 5171095AI, 5171095AL, 5171095AH, 5171095AF, 5171095AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2011 Dodge Avenger | Express, Lux, Mainstreet, R/T, SE, SXT | 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Muffler & Tail Pipe Part Number: 52022288AH
Product Specifications
- Other Name: Exhaust; Exhaust Muffler; Exhaust Pipe; Muffler W/Tpipe; Muffler And Tailpipe Exhaust; Muffler
- Replaces: 52022288AF, 52022288AE, 52022288AG, 52022288AD, 52022288AC, 52022288AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Avenger | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 3.6L V6, 6 Cyl 3.6 L FLEX

Dodge Avenger Muffler

Choose OEM Muffler that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Muffler follows strict manufacturing steps to lock in quality and fit. If your Dodge Avenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Avenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Therefore, the Muffler is an essential feature notably defining the efficiency and durability of the Dodge Avenger models. With the main features of efficiently routing dangerous exhaust fumes from the Dodge Avenger's interior, the Muffler contributes significantly to minimizing the earsplitting noise from the engine, making driving safer and more comfortable. This part is relevant to a variety of Dodge Avenger models improving practical characteristics of the car by reducing dangerous effects of poisonous carbon monoxide. Made from stainless steel or aluminized steel, the Muffler ranges from the direct fit to the universal type giving people a variety to choose from. Those with performance-oriented designs tend to pay much attention to the flow of the exhaust system and the sound it produces hence the Muffler. Also, in the case of the Muffler, the capability to accommodate low-frequency noise along with the engine efficiency is another factor because a high level of back pressure can harm the vehicle. Since most of the countries have reinforced their rules on the standards of noise and emissions, Muffler Dodge avenger is still a relevant component of car production. Its enhancements embedding and increase the sturdiness and flexibility of the muffler to the different engine layouts add to the Muffler's appeal in the automobile market, making it a must-have in the Dodge Avenger.

Dodge Avenger Muffler Parts and Q&A

Muffler & Tail Pipe
5171096AI
Q: How to Maintain Your Muffler for Optimal Performance on Dodge Avenger?
A:
Always let the exhaust system cool before service, as its temperature near the Catalytic Converter can go very high. Band clamps should be spot welded alongside the exhaust system; any time you need to replace a band clamp, grind off the spot weld from the Exhaust Pipe. If changing any part of your exhaust system, use genuine parts or those designed to be the same. Lift the automobile on a hoist first and nerves apply oil to loosen band clamp 4. Take out the ground strap from the muffler and loosen band clamp 4. Remove the rubber isolators by hand and use soap or silicone spray to make it smoother, but don't use petroleum as it can hurt the rubber. Keep working by disconnecting the support isolators and getting rid of the muffler/resonator assembly.
Muffler & Tail Pipe
5171095AM
Q: How to Install a Muffler Assembly on Dodge Avenger?
A:
The assembly should first be lined up over the opening of the catalytic converter pipe. After that, mount grip isolator 1 and check that the assembly remains aligned, so all support isolators share the same load. Latch the band clamp 4 to 54 Nm which equals 40 ft. lbs. Hold the ground wire to the muffler and after that drop the car down to the ground. Run the engine and check for any escaping exhaust, fixing them if you find any of these issues. At the end, check the exhaust system and fix any spots that make contact with the panels.