How to Service and Repair a Liftgate Hinge on Dodge Caliber?

Remove the liftgate latch to let the liftgate open, enabling you to reach the hinge for service or repair. Disconnect the wiring and washer hose from the liftgate and then lift it onto an appropriate device to hold it up freely in the open position on the side you are working on. Take out the two screws holding the liftgate hinge to the liftgate and afterwards detach the liftgate from the hinge. Then, go down the headliner to access and unlock the two nuts and the fastener, so you can take off the hinge from the car.

How to Install a Liftgate Hinge on Dodge Caliber?

When you align the liftgate hinge with the liftgate hinge, get someone to assist you. Carefully separate the headliner and then fasten it down, adding in the washers and nuts, followed by a tightening of the nuts to 20 Nm (15 ft. lbs). After that, secure the gas props in place and plug in the liftgate harness.

OEM Dodge Caliber Liftgate Hinge

Luggage Compartment Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Liftgate Hinges found

View related parts
Dodge Caliber Hinge, Rear Passenger Side Part Number: 4589530AA
$67.29 MSRP: $98.15
You Save: $30.86 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear Right; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Hinge, Rear Driver Side Part Number: 4589531AA
$69.66 MSRP: $98.15
You Save: $28.49 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear Left; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Hinge, Rear Driver Side Part Number: 5115749AF
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear Left; Liftgate Hinge; Door Hinge
- Position: Rear Driver Side
- Replaces: 5115749AD, 5115749AC, 5115749AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Caliber | R/T, SE, SXT | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Hinge, Rear Passenger Side Part Number: 5115748AF
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear Right; Liftgate Hinge; Door Hinge
- Position: Rear Passenger Side
- Replaces: 5115748AC, 5115748AE, 5115748AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Caliber | R/T, SE, SXT | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Dodge Caliber Liftgate Hinge

Choose OEM Liftgate Hinge that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Liftgate Hinge follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Caliber Liftgate Hinge serves as an essential assembly which enables smooth functionality of the rear storage compartment on Dodge Caliber vehicles to easily access tools and luggage. The Liftgate Hinge functions as a performance-critical part which assists the liftgate to stay open thus enabling effortless access when users operate their vehicle. The Liftgate Hinge shows signs of deterioration through normal wearing because this leads to misalignment and noise generation that emphasizes the significance of scheduled maintenance. The replacement process requires thorough check for compatibility since Dodge Caliber models possess distinctive Liftgate Hinge designs that must match specific year, make, model and trim models. The meticulous examination allows the Liftgate Hinge proper functioning which produces maximum efficiency and safety benefits for vehicle operators and occupants. Safety ratings have made the Dodge Caliber famous among car owners throughout its life from 2007 to 2012 and this highlights the importance of evaluating Liftgate Hinge reliability. Maintenance becomes more convenient because the Liftgate Hinges enable side interchangeability. The automotive market appreciates the Dodge Caliber part because it performs a critical vehicle function that boosts the automaker model safety and operation efficiency.

Dodge Caliber Liftgate Hinge Parts and Q&A

Hinge, Rear Passenger Side
4589530AA
Q: How to Service and Repair a Liftgate Hinge on Dodge Caliber?
A:
Remove the liftgate latch to let the liftgate open, enabling you to reach the hinge for service or repair. Disconnect the wiring and washer hose from the liftgate and then lift it onto an appropriate device to hold it up freely in the open position on the side you are working on. Take out the two screws holding the liftgate hinge to the liftgate and afterwards detach the liftgate from the hinge. Then, go down the headliner to access and unlock the two nuts and the fastener, so you can take off the hinge from the car.
Hinge, Rear Driver Side
4589531AA
Q: How to Install a Liftgate Hinge on Dodge Caliber?
A:
When you align the liftgate hinge with the liftgate hinge, get someone to assist you. Carefully separate the headliner and then fasten it down, adding in the washers and nuts, followed by a tightening of the nuts to 20 Nm (15 ft. lbs). After that, secure the gas props in place and plug in the liftgate harness.