OEM Dodge Caliber Water Pump

H2O Pump
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Water Pumps found

  • Dodge Caliber Water Pump Diagram - 5047138AC
    View related parts

    Dodge Caliber Water Pump Part Number: 5047138AC

    $103.42 MSRP: $158.00
    You Save: $54.58 (35%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Pump - Water; Engine Water Pump Assembly; Water Pump Assembly; Pump Water; Engine Water Pump
    • Replaces: 5047138AB, 5047138AA, MN187244
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
  • Dodge Caliber Water Pump - 4884784AC
    Dodge Caliber Water Pump Diagram - 4884784AC
    View related parts
    Product Specifications
    • Other Name: Pump - Water; Engine Water Pump; Pump Water
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 2008-2009 Dodge Caliber | SRT-4 | 4 Cyl 2.4 L GAS

Dodge Caliber Water Pump

Choose OEM Water Pump that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Water Pump follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Water Pump part plays a big role in the durability and ability of Dodge Caliber cars. This water pump is used to pump water from the radiator to the engine to deal with heat produced during the burning process. Almost all the generation of Dodge Caliber cars come equipped with a belt-driven water pump with an impeller inside, thereby circulating the coolant all through the engine block and back to the radiator. Unlike many earlier models of cast iron pumps, new Water Pumps consist of aluminum and have shafts that are mounted on bearings. These are signs that the water pump is faulty, one may notice a problem with their coolant or overheating of the engine, shows how vital the water pump is and its significance to a vehicle. The Water Pump fits various Caliber types, which means that it would not let down drivers of different vehicles in the line. Moreover, there are high performance water pumps for increased coolant flow, compared to the standard ones, that would decrease the parasitic loss of power and could be beneficial for those who want to have more powerful cars. Another potential for electric water pumps also contributes to increasing the Dodge Caliber's and cooling control for custom uses. Thanks to its image of sturdiness, the Water Pump takes a prominent position on the automotive market and is a critical component related to the functionality and security of Dodge Caliber cars.

Dodge Caliber Water Pump Parts and Q&A

  • Q: How to Install a Water Pump on Dodge Caliber?
    A:
    Start by placing the gasket and water pump assembly over the cylinder block and next put the water inlet tube and its gasket in place on the water pump. Add and tighten the mounting bolts until you reach 24 Nm (18 ft. lbs.). Place the Drive Belt splash shield next and then lower the car. Follow that by fitting the accessory drive belt, removing air from the cooling system and topping it out. Inspect the cooling system looking for any leaks.
  • Q: How to Remove and Replace a Water Pump on a Gas Engine on Dodge Caliber?
    A:
    The very first step in removing the water pump is to take off the accessory belt and empty the coolant from the engine. Once that's done, lift the vehicle and disconnect the accessory Drive Belt splash shield. After that, drain the empty cooling system and unscrew the pulley attached to water pump 1, followed by taking out that pulley. With the bolts out, put the water pump aside and move along to the next part of the check.

Related Dodge Caliber Parts