How to install a Brake Master Cylinder Reservoir on Dodge Charger?

You should start by putting the new brake fluid reservoir sealing grommets inside the master cylinder housing while installing the brake master cylinder reservoir. Drizzle clean brake fluid on the surface where the reservoir attaches and align the reservoir with the sealing grommets. Rock and push it down at the same time until the reservoir is set in place. After the hole is drilled, check that the top of both sealing grommets is in contact with the fluid reservoir. After that, add the reservoir mount screw and torque it to 28 Nm or 250 in. lbs. The wiring arrives at the fluid sensor mounted inside the brake fluid reservoir. Place clean and fresh Mopar(R) Brake Fluid or an alternative into the master cylinder reservoir. After that, put in the access panel over the cowl at the top of the engine. Before starting the vehicle, you need to feel a firm brake pedal; if that doesn't happen, drain and recheck the brake system for any leaks. Check the brakes by taking the vehicle out on a short trip.

OEM Dodge Charger Brake Master Cylinder Reservoir

Brake Fluid Storage Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Master Cylinder Reservoirs found

View related parts
Dodge Charger Master Cylinder Part Number: 68048549AB
$42.08 MSRP: $62.60
You Save: $20.52 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Brake Master Cylinder; Brake Master Cylinder Reservoir; Brake Reservoir; Master Cylinder Reservoir; Reservoir; Reservoir Brake Master Cylinder; Brake Master Cylinder
- Replaces: 68048549AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2023 Dodge Charger | Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 2.7L V6, 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Reservoir Part Number: 5139150AA
Product Specifications
- Other Name: Reservoir - Brake Master Cylinder; Brake Master Cylinder Reservoir; Reservoir Brake Master Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Charger | Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger Master Cylinder Reservoir Part Number: 68033787AA
Product Specifications
- Other Name: Reservoir - Brake Master Cylinder; Brake Master Cylinder Reservoir; Reservoir; Reservoir Brake Master Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Charger | Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

Dodge Charger Brake Master Cylinder Reservoir

Choose OEM Brake Master Cylinder Reservoir that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Master Cylinder Reservoir follows strict manufacturing steps to lock in quality and fit. If your Dodge Charger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Charger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Charger Brake Master Cylinder Reservoir Parts and Q&A

Master Cylinder
68048549AB
Q: How to install a Brake Master Cylinder Reservoir on Dodge Charger?
A:
You should start by putting the new brake fluid reservoir sealing grommets inside the master cylinder housing while installing the brake master cylinder reservoir. Drizzle clean brake fluid on the surface where the reservoir attaches and align the reservoir with the sealing grommets. Rock and push it down at the same time until the reservoir is set in place. After the hole is drilled, check that the top of both sealing grommets is in contact with the fluid reservoir. After that, add the reservoir mount screw and torque it to 28 Nm or 250 in. lbs. The wiring arrives at the fluid sensor mounted inside the brake fluid reservoir. Place clean and fresh Mopar(R) Brake Fluid or an alternative into the master cylinder reservoir. After that, put in the access panel over the cowl at the top of the engine. Before starting the vehicle, you need to feel a firm brake pedal; if that doesn't happen, drain and recheck the brake system for any leaks. Check the brakes by taking the vehicle out on a short trip.