How to remove a Torsion Bar on Dodge Durango?

To remove the torsion bar, first ensure the vehicle is raised and supported with the front suspension hanging, and then take off the transfer case skid plate, counting and recording the number of turns for installation reference. Mark the adjustment bolt setting before installing loader/unloader tool 8686 to the anchor arm and the cross member. Increase the tension on the anchor arm loader/unloader tool 8686 until the load is removed from the adjustment bolt and the adjuster nut. Next, turn the adjustment bolt counterclockwise to remove both the bolt and the adjuster nut. Finally, remove the loader/unloader tool 8686, allowing the torsion bar to unload. Remember that the left and right side torsion bars are not interchangeable, as they are stamped R or L, and can be installed with either end facing forward.

Are the left and right side Torsion Bars interchangeable, and what is the installation process for them on Dodge Durango?

Torsion bars for the left and right side are not interchangeable, as they are marked and stamped R or L for right or left. Either end may be installed forward. The torsion bar ends should first be placed into the anchor and the suspension arm, afterward place the anchor in the crossmember frame. Utilize loader/unloader tool 8686 to connect the anchor to the crossmember and increase the tension on the anchor to load the torsion bar. Following that, the adjustment bolt and adjuster nut are then installed with the adjustment bolt being clockwise turned. Follow up by removing the loader/unloader tool 8686 from the torsion bar crossmember, installing the transfer case skid plate, lowering the vehicle and adjusting the front suspension height before wheel aligning.

OEM Dodge Durango Torsion Bar

Suspension Torsion Bar

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Torsion Bars found

View related parts
Dodge Durango Torsion Bar, Front Part Number: 52113160AA
$175.87 MSRP: $179.00
You Save: $3.13 (2%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Torsion; Torsion Bar, Front; Bar Torsion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Durango | Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Torsion Bar, Front Part Number: 52855406AA
$180.80
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Torsion; Torsion Bar, Front; Bar Torsion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Dodge Durango | Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Torsion Bar Anchor End, Front Driver Side Part Number: 52005145AB
$72.84 MSRP: $91.85
You Save: $19.01 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Torsion Bar; Torsion Bar Adjusting Arm, Front Left; Torsion Bar Mount; Anchor; Anchor Torsion Bar
- Position: Front Driver Side
- Replaces: 52005145AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Durango | Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Torsion Bar, Front Part Number: 52855407AA
Product Specifications
- Other Name: Spring - Torsion; Torsion Bar, Front; Bar Torsion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Dodge Durango | Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Torsion Bar, Front Part Number: 52113161AA
Product Specifications
- Other Name: Spring - Torsion; Torsion Bar, Front; Bar Torsion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Durango | Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Torsion Bar, Front Driver Side Part Number: 52106645AA
Product Specifications
- Other Name: Spring - Torsion; Torsion Bar, Front Left; Bar Torsion
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Dodge Durango | Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Torsion Bar, Front Passenger Side Part Number: 52106644AA
Product Specifications
- Other Name: Spring - Torsion; Torsion Bar, Front Right; Bar Torsion
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Dodge Durango | Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Torsion Bar, Front Part Number: 52106179AA
Product Specifications
- Other Name: Spring Torsion; Torsion Bar, Front; Bar Torsion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Durango | Base, SLT, SLT Plus | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Torsion Bar, Front Part Number: 52106178AA
Product Specifications
- Other Name: Spring Torsion; Torsion Bar, Front; Bar Torsion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Durango | Base, SLT, SLT Plus | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Torsion Bar Part Number: 5011289AA
Product Specifications
- Other Name: Bar - Seat Torsion Bar; Bracket Seat Torsion Bar
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2003 Dodge Durango | Base, R/T, SLT, SLT Plus, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Torsion Bar Anchor, Front Part Number: 52113061AC
Product Specifications
- Other Name: Bracket - Torsion Bar; Torsion Bar Mount, Front; Torsion Bar Anchor End; Anchor Torsion Bar; Torsion Bar Mount
- Position: Front
- Replaces: 52113061AB, 52038973AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2003 Dodge Durango | Base, R/T, SLT, SLT Plus, Sport, SXT | 4.7L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Torsion Bar Anchor End, Front Passenger Side Part Number: 52005144AB
Product Specifications
- Other Name: Bracket - Torsion Bar; Torsion Bar Adjusting Arm, Front Right; Torsion Bar Mount; Anchor; Anchor Torsion Bar
- Position: Front Passenger Side
- Replaces: 52005144AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Durango | Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Torsion Bar, Front Part Number: 52113305AA
Product Specifications
- Other Name: Spring - Torsion; Torsion Bar, Front; Bar Torsion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Durango | Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Torsion Bar, Front Part Number: 52113302AA
Product Specifications
- Other Name: Spring - Torsion; Torsion Bar, Front; Bar Torsion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Durango | Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Torsion Bar, Front Part Number: 52855909AB
Product Specifications
- Other Name: Spring - Torsion; Torsion Bar, Front; Bar Torsion
- Position: Front
- Replaces: 52855909AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Durango | Limited, SE, SLT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Torsion Bar, Front Part Number: 52855908AB
Product Specifications
- Other Name: Spring - Torsion; Torsion Bar, Front; Bar Torsion
- Position: Front
- Replaces: 52855908AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Durango | Limited, SE, SLT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS

Dodge Durango Torsion Bar

Choose OEM Torsion Bar that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Torsion Bar follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Durango Torsion Bar serves as a spring that lifts the weight of the vehicle by twisting instead of compressing or flattening. It allows for control of ride height, and the effective absorbing of bumps on the road. The Torsion Bar is attached in such a way that one end is affixed to the Dodge chassis frame while the opposite end connects with the lower control arm on the Durango front suspension. Subsequently, as the wheel moves in a vertical direction, the steel rod will twist. In turn, this action stores energy. This small design weighs less than either a coil or a leaf spring. Adjustment of ride height is done by means of the bolts located at the keyed ends of each Torsion Bar. This allows for fine tuning of the Dodge body to keep it level with the road and also maintain proper alignment. The adjustment will allow the operator to have even tire wear. The tension helps the Durango keep handling stability and lessens the likelihood of bottoming out. Regularly inspecting the Torsion Bar for bends, cracks or scraped coating can halt early wear. Because the Torsion Bar is positioned low under the vehicle, impact damage or metal fatigue may lower the Dodge front end and degrade ride quality for Durango.

Dodge Durango Torsion Bar Parts and Q&A

Torsion Bar, Front
52855406AA
Q:
How to remove a Torsion Bar on Dodge Durango?
A:
To remove the torsion bar, first ensure the vehicle is raised and supported with the front suspension hanging, and then take off the transfer case skid plate, counting and recording the number of turns for installation reference. Mark the adjustment bolt setting before installing loader/unloader tool 8686 to the anchor arm and the cross member. Increase the tension on the anchor arm loader/unloader tool 8686 until the load is removed from the adjustment bolt and the adjuster nut. Next, turn the adjustment bolt counterclockwise to remove both the bolt and the adjuster nut. Finally, remove the loader/unloader tool 8686, allowing the torsion bar to unload. Remember that the left and right side torsion bars are not interchangeable, as they are stamped R or L, and can be installed with either end facing forward.
Torsion Bar, Front
52113160AA
Q:
Are the left and right side Torsion Bars interchangeable, and what is the installation process for them on Dodge Durango?
A:
Torsion bars for the left and right side are not interchangeable, as they are marked and stamped R or L for right or left. Either end may be installed forward. The torsion bar ends should first be placed into the anchor and the suspension arm, afterward place the anchor in the crossmember frame. Utilize loader/unloader tool 8686 to connect the anchor to the crossmember and increase the tension on the anchor to load the torsion bar. Following that, the adjustment bolt and adjuster nut are then installed with the adjustment bolt being clockwise turned. Follow up by removing the loader/unloader tool 8686 from the torsion bar crossmember, installing the transfer case skid plate, lowering the vehicle and adjusting the front suspension height before wheel aligning.