How to Properly Lubricate and Install a Lash Adjuster in an Engine on Dodge Grand Caravan?

Place engine oil on the lifters and ensure the hole in the lifter is upwards while inserted into the bore. Place the hydraulic lifters into the block with their lubrication holes aligned upward and with their original positions if recycling the valve train. Adjust the lifter so that the yokes are lined up and add the yoke retainer, tightening all screws to 12 Nm (105 in. lbs.). Now you should install the cylinder heads. Turn the engine on and let it rise to normal operating temperature, but do not let it run above fast idle before all hydraulic lifters are filled with oil and they are quiet.

How to Service and Repair a Lash Adjuster on Dodge Grand Caravan?

First take out the cylinder head to have access to the lifter/lash adjuster hydraulic tappets. First, take out the cylinder head, then remove the yoke retainer and put the yokes back together. Drill them out using Special Tool C-4129 or another equivalent tool and be sure to ID each tappet for correct installation if they will be reused. Before installing the taps, apply lubricant to them and place them back in the same spots, when being reused. After that, fit the tappet aligning yokes and attach the yoke retainer, tightening the screws to 12 Nm (105 in. lbs.). After that, fit the cylinder heads again and start up the engine, letting it run until it reaches normal working temperature. Be sure to avoid letting the engine run above its fast idle until the oil has filled the hydraulic tappets and the valves run quietly, so that no damage happens to the valve mechanism.

OEM Dodge Grand Caravan Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Lash Adjusters found

View related parts
Dodge Grand Caravan Valve Lifters Part Number: MD377560
$16.92 MSRP: $26.55
You Save: $9.63 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve Lash; Lash Adjuster; Valve Lash Adjuster; Adjuster; Adjuster Valve Lash
- Replaces: MD377561
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-2000, 1987-1989 Dodge Grand Caravan | Base, ES, LE, SE, Sport | 6 Cyl 3.0 L GAS
View related parts
Dodge Grand Caravan Valve Lifters Part Number: 5184332AA
$12.76 MSRP: $18.40
You Save: $5.64 (31%)
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve Lash; Engine Valve Lifter; Valve Lifter; Adjuster Valve Lash Exhaust; Adjuster Valve Lash Intake; Adjuster Valve Lash
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2020 Dodge Grand Caravan | American Value Package, C/V, Crew, Express, GT, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Grand Caravan Valve Lifters Part Number: 4777976AA
$29.19 MSRP: $37.90
You Save: $8.71 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve Lash; Valve Lifter; Adjuster Valve Lash
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1997 Dodge Grand Caravan | Base, SE | 4 Cyl 2.4 L GAS
View related parts
Dodge Grand Caravan Valve Lifters Part Number: 4621938AB
$41.37 MSRP: $58.60
You Save: $17.23 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve; Valve Lifter
- Replaces: 4621938
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-2008 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EL, ES, EX, LE, SE, SE Plus, SXT, Sport | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Valve Lifters Part Number: 4713439
Product Specifications
- Other Name: Tappet Package - Valve; Engine Valve Lifter; Valve Lifter; Tappet, Valve - Standard; Tappet Package Valve; Tappet, Valve Lifter; Tappet, Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1991 Dodge Grand Caravan | LE, SE | 6 Cyl 3.3 L GAS
View related parts
Dodge Grand Caravan Valve Lifters Part Number: 4892465AB
Product Specifications
- Other Name: Tappet - Valve
- Replaces: 4892465AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Grand Caravan | C/V, SE, SXT | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

Dodge Grand Caravan Lash Adjuster

Choose OEM Lash Adjuster that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Lash Adjuster follows strict manufacturing steps to lock in quality and fit. If your Dodge Grand Caravan matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Caravan parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Grand Caravan Lash Adjuster Parts and Q&A

Valve Lifters
4621938AB
Q: How to Properly Lubricate and Install a Lash Adjuster in an Engine on Dodge Grand Caravan?
A:
Place engine oil on the lifters and ensure the hole in the lifter is upwards while inserted into the bore. Place the hydraulic lifters into the block with their lubrication holes aligned upward and with their original positions if recycling the valve train. Adjust the lifter so that the yokes are lined up and add the yoke retainer, tightening all screws to 12 Nm (105 in. lbs.). Now you should install the cylinder heads. Turn the engine on and let it rise to normal operating temperature, but do not let it run above fast idle before all hydraulic lifters are filled with oil and they are quiet.
Valve Lifters
MD377560
Q: How to Service and Repair a Lash Adjuster on Dodge Grand Caravan?
A:
First take out the cylinder head to have access to the lifter/lash adjuster hydraulic tappets. First, take out the cylinder head, then remove the yoke retainer and put the yokes back together. Drill them out using Special Tool C-4129 or another equivalent tool and be sure to ID each tappet for correct installation if they will be reused. Before installing the taps, apply lubricant to them and place them back in the same spots, when being reused. After that, fit the tappet aligning yokes and attach the yoke retainer, tightening the screws to 12 Nm (105 in. lbs.). After that, fit the cylinder heads again and start up the engine, letting it run until it reaches normal working temperature. Be sure to avoid letting the engine run above its fast idle until the oil has filled the hydraulic tappets and the valves run quietly, so that no damage happens to the valve mechanism.