How to Remove and Replace the Front Exhaust Manifold on Dodge Journey?

To change the front maniverter and gasket, first set them in place, secure them with the retaining bolts and tighten them starting in the center at 23 N.m (200 in. lbs). After that, place the upper heat shield and tighten the nuts to 12 Nm (105 in. lbs). Set up the tube and retaining bolt that comes with the oil level indicator. The next step is to install the left upstream oxygen sensor, then join the harness connector and finally go on to the downstream sensor and hook up its harness connector. Afterward, set the left maniverter cross in place under the pipe and tighten the retaining bolts to 31 N.m (275 in. lbs). After that, fasten the belly pan to the frame using the 12 fasteners and plug in the negative battery cable.

How to Remove and Replace an Exhaust Manifold in an AWD for Rear on Dodge Journey?

Clean both the sealing faces on the right maniverter with the proper tool before removing it. After that, install the right maniverter in the engine compartment and set it up so that you can attach its lower heat shield with heat shield retainers. Use the original maniverter and gasket and secure them in place with retaining bolts, beginning with the middle and tightening them out to 23 Nm (200 in. lbs.). After that, fit the top maniverter heat shield using the appropriate heat shield retainers. After that, attach the intermediate shaft and right half shaft. Proceed by suitably connecting the maniverter harness wires near both the oxygen sensors and then clipping the wires back on the connectors. Set the exhaust crossunder pipe and the exhaust extension pipe in place. Entry into the front wheel area should include the wheel and its associated parts, then the belly pan and its twelve fasteners. Reduce the jack stand to secure the vehicle, then connect the negative cable after tightening its nut with 5 Nm (45 in. lbs.).

OEM Dodge Journey Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Exhaust Manifolds found

View related parts
Dodge Journey Exhaust Manifold Part Number: 4693321AD
$321.77 MSRP: $479.00
You Save: $157.23 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Manifold; Exhaust for Converter Manifold Assembly, Refer to Group 11 Exhaust.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2020 Dodge Journey | AVP, Base, Crossroad, Express, SE, SE Value, SXT | 4 Cyl 2.4 L GAS
View related parts
Dodge Journey Catalytic Converter, Rear Part Number: 68036150AL
$1435.45 MSRP: $2105.00
You Save: $669.55 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter, Rear; Exhaust Manifold; Manifold; Manifold Exhaust And Catalytic Converter Maniverter
- Position: Rear
- Replaces: 68036150AB, 68036150AC, 68036150AA, 68036150AJ, 68036150AI, 68036150AH, 68036150AF, 68036150AE, 68036150AD, 68036150AK, 68036150AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2019 Dodge Journey | Crew, Crossroad, GT, Limited, Lux, Mainstreet, R/T, SE, SXT | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Catalytic Converter, Passenger Side Part Number: 5171140AC
$2340.00 MSRP: $3425.00
You Save: $1085.00 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust and Catalytic Converter; Right Catalytic Converter with Integrated Manifold.; Manifold
- Position: Passenger Side
- Replaces: 5171140AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Journey | Crew, R/T, SXT | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Catalytic Converter, Driver Side Part Number: 5171143AD
$943.68 MSRP: $1360.00
You Save: $416.32 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter with Integrated Exhaust Manifold, Left; Exhaust Manifold; Manifold
- Position: Driver Side
- Replaces: 5171143AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Journey | Crew, R/T, SXT | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Catalytic Converter, Passenger Side Part Number: 68042142AB
$1504.15 MSRP: $2205.00
You Save: $700.85 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust and Catalytic Converter; Right Catalytic Converter with Integrated Manifold.; Manifold
- Position: Passenger Side
- Replaces: 68042142AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Journey | Crew, R/T, SXT | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Catalytic Converter, Driver Side Part Number: 68042141AB
$1922.08 MSRP: $2820.00
You Save: $897.92 (32%)
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust and Catalytic Converter; Left Catalytic Converter with Integrated Manifold.; Manifold
- Position: Driver Side
- Replaces: 68042141AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Journey | Crew, R/T, SXT | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Catalytic Converter, Front Part Number: 68036151AM
$1418.28 MSRP: $2080.00
You Save: $661.72 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter, Front; Exhaust Manifold; Manifold; Manifold Exhaust And Catalytic Converter Maniverter
- Position: Front
- Replaces: 68036151AJ, 68036151AA, 68036151AK, 68036151AE, 68036151AB, 68036151AH, 68036151AI, 68036151AC, 68036151AL, 68036151AF, 68036151AD, 68036151AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2019 Dodge Journey | Crew, Crossroad, GT, Limited, Lux, Mainstreet, R/T, SE, SXT | 3.6L V6, 6 Cyl 3.6 L FLEX

Dodge Journey Exhaust Manifold

Choose OEM Exhaust Manifold that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Exhaust Manifold follows strict manufacturing steps to lock in quality and fit. If your Dodge Journey matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Journey parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Journey Exhaust Manifold can be described as a critical part of the car's exhaust system as it has the exclusive function to channel hot gases produced during the combustion process away from the engine which in turn improves the automobile's performance. There is no denying the popularity of the Dodge Journey Exhaust Manifold; the material used in the manufacture of this product is often cast iron or stainless steel making it as hard wearing as it is functional. This manifold is meant to stop intake reversion and to supply adequate air flow, which in itself is a requirement for the proper performance of the Dodge Journey's powerplant. Applicability with different Journey models particularly those produced in the post 2009 era underlines its relevance in sustaining the vehicles' performance benchmark. The Dodge Journey which has a good acclaim for interior trims, and safety features in particular will be positively impacted by a good working Exhaust Manifold since it minimizes on the emission of dangerous fumes into the cabin, hence improving the safety of passengers. Some of the features that can be noted with regard to the Dodge Journey Exhaust Manifold include its capacity to regulate heat in the engine bay, which is important especially when it comes to efficiency of the engines. Also, based on the magnitude of back pressure, there may be other features on the manifold that provide means to adjust back pressure in real time, depending on circumstances. All in all, the Dodge Journey Exhaust Manifold is a significant product in the automotive market because of its vital function in the proper functioning of the Dodge Journey preventing potential mishaps and ensuring the vehicle's efficiency for the Journey owner.

Dodge Journey Exhaust Manifold Parts and Q&A

Catalytic Converter, Passenger Side
5171140AC
Q: How to Remove and Replace the Front Exhaust Manifold on Dodge Journey?
A:
To change the front maniverter and gasket, first set them in place, secure them with the retaining bolts and tighten them starting in the center at 23 N.m (200 in. lbs). After that, place the upper heat shield and tighten the nuts to 12 Nm (105 in. lbs). Set up the tube and retaining bolt that comes with the oil level indicator. The next step is to install the left upstream Oxygen Sensor, then join the harness connector and finally go on to the downstream sensor and hook up its harness connector. Afterward, set the left maniverter cross in place under the pipe and tighten the retaining bolts to 31 N.m (275 in. lbs). After that, fasten the belly pan to the frame using the 12 fasteners and plug in the negative Battery Cable.
Exhaust Manifold
4693321AD
Q: How to Remove and Replace an Exhaust Manifold in an AWD for Rear on Dodge Journey?
A:
Clean both the sealing faces on the right maniverter with the proper tool before removing it. After that, install the right maniverter in the engine compartment and set it up so that you can attach its lower heat shield with heat shield retainers. Use the original maniverter and gasket and secure them in place with retaining bolts, beginning with the middle and tightening them out to 23 Nm (200 in. lbs.). After that, fit the top maniverter heat shield using the appropriate heat shield retainers. After that, attach the intermediate shaft and right half shaft. Proceed by suitably connecting the maniverter harness wires near both the Oxygen Sensors and then clipping the wires back on the connectors. Set the exhaust crossunder pipe and the exhaust extension pipe in place. Entry into the front wheel area should include the wheel and its associated parts, then the belly pan and its twelve fasteners. Reduce the jack stand to secure the vehicle, then connect the negative cable after tightening its nut with 5 Nm (45 in. lbs.).