How Can a Seat Heater Be Installed to Prevent Premature Failure on Dodge Journey?

Be careful not to fold or crease the element assembly when you install the new component because this may result in it failing sooner. Take off the adhesive covering on the back of the new element (2) and paste it onto the foam pad at the same spot as the original one, using the marks on the foam to guide you. Then, attach the heating element electrical connectors (3 and 4) together and restore the battery's negative wire to the car frame. After that, see if the heated seat system is operating as it should. In the end, place the suitable seat cushion trim cover or seat back trim cover. Run the seat wire harness as needed through the seat and seat back, tucking any excess wire between the seat cushion foam and the back carpet of the seat cover trim. Remove and get rid of the factory heater element when you clean out the system.

How to Remove a Seat Heater Pad on Dodge Journey?

Before you remove the heater pad, cut the battery negative cable and isolate it. After that, remove the seat cushion trim cover or seat back trim cover. Following this, unhook the power supply to the unresponsive seat department. Slowly lift the heater element from the foam anti-condensation pad, being careful not to tear off too much foam as you lift it.

OEM Dodge Journey Seat Heater

Seat Warmer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Seat Heaters found

View related parts
Dodge Journey Seat Back Heater, Front Upper Passenger Side Part Number: 68140170AB
$101.86 MSRP: $151.00
You Save: $49.14 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back; Seat Heater Pad, Front Right Upper; Heated Pad Seat Back
- Position: Front Upper Passenger Side
- Replaces: 68140170AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2020 Dodge Journey | AVP, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Seat Back Heater, Front Upper Driver Side Part Number: 68140109AB
$103.44 MSRP: $154.00
You Save: $50.56 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Heated Pad - Seat Back; Seat Heater Pad, Front Left Upper; Element; Heated Pad Seat Back
- Position: Front Upper Driver Side
- Replaces: 68140109AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2020 Dodge Journey | AVP, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SXT | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Seat Cushion Heater, Front Passenger Side Part Number: 68140105AB
$111.77 MSRP: $165.00
You Save: $53.23 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Heater Pad, Front Left Lower, Front Right; Element; Heated Pad Seat Cushion
- Position: Front Passenger Side
- Replaces: 68140105AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2020 Dodge Journey | AVP, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SXT | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Seat Cushion Heater, Front Lower Driver Side Part Number: 4610192AA
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Heater Pad, Front Left Lower, Front Right Lower; Element; Heated Pad Seat Cushion
- Position: Front Lower Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2011 Dodge Journey | Base, Crew, Express, Lux, Mainstreet, R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Seat Cushion Heater, Front Passenger Side Part Number: 4610076AA
Product Specifications
- Other Name: Pad - Heater; Seat Heater Pad, Front Right; Element; Bolster; Pad Heater Cushion; Seat Heater
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Journey | R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Seat Back Heater, Front Upper Passenger Side Part Number: 4610194AA
Product Specifications
- Other Name: Pad - Seat Back; Seat Heater Pad, Front Left Upper, Front Right Upper; Element; Heated Pad Seat Back
- Position: Front Upper Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Journey | R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Seat Back Heater, Front Upper Driver Side Part Number: 68042223AA
Product Specifications
- Other Name: Heated Pad - Seat Back; Seat Heater Pad, Front Left Upper, Front Right Upper; Element; Heated Pad Seat Back
- Position: Front Upper Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2011 Dodge Journey | Base, Crew, Express, Lux, Mainstreet, R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX

Dodge Journey Seat Heater

Choose OEM Seat Heater that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Seat Heater follows strict manufacturing steps to lock in quality and fit. If your Dodge Journey matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Journey parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

This is a center point in Dodge Journey Seat Heater that benefit the ride quality that is found in production Dodge Journey cars that are renown for their dependability and power. This new innovative Seat Heater is developed to fitted into the seats fabricated with desired cloth material to offer warmth and comfort to passengers in cold climate conditions. The Dodge Journey with a powerful and recognizable three-row interior flexibility and practicality, constitutes a huge advantage to utilize Seat Heater, which not only comforts drivers but also contributes to the machines proper performance and security. Typically installed in various Journey models, the Seat Heater has changed with time through increased designs and features to suit the users of the automobiles. This sociable feature is further complemented by the car's safety features such as highly developed braking mechanism and multiple bags to cater for safety of the family members. The featured Seat Heater means that the brand endeavors to guarantee comfort to the users of the Dodge Journey, all the while keeping performance in mind. Thus, this product, the Dodge Journey Seat Heater is unique within the market of automotive parts because of its installation process and ease of use in making every ride enjoyable. In conclusion, the Dodge Journey Seat Heater is a perfect example of the design produced and delivered by the company to ensure the satisfaction of its customers choosing comfortable automobiles.

Dodge Journey Seat Heater Parts and Q&A

Seat Cushion Heater, Front Passenger Side
4610076AA
Q: How Can a Seat Heater Be Installed to Prevent Premature Failure on Dodge Journey?
A:
Be careful not to fold or crease the element assembly when you install the new component because this may result in it failing sooner. Take off the adhesive covering on the back of the new element (2) and paste it onto the foam pad at the same spot as the original one, using the marks on the foam to guide you. Then, attach the heating element electrical connectors (3 and 4) together and restore the battery's negative wire to the car frame. After that, see if the heated seat system is operating as it should. In the end, place the suitable seat cushion trim cover or seat back trim cover. Run the seat wire harness as needed through the seat and seat back, tucking any excess wire between the seat cushion foam and the back carpet of the Seat Cover trim. Remove and get rid of the factory heater element when you clean out the system.
Seat Back Heater, Front Upper Passenger Side
4610194AA
Q: How to Remove a Seat Heater Pad on Dodge Journey?
A:
Before you remove the heater pad, cut the battery negative cable and isolate it. After that, remove the seat cushion trim cover or seat back trim cover. Following this, unhook the power supply to the unresponsive seat department. Slowly lift the heater element from the foam anti-condensation pad, being careful not to tear off too much foam as you lift it.