How to Service and Repair a Windshield Washer Pump for Front and Rear Windshields on Dodge Journey?

Remove the negative cable from the battery to disconnect and isolate the front and rear windshield washers and protect the electrical system. Take out the washer fluid from the tank and keep it in a clean, reusable bottle. Change the washer reservoir by getting rid of it from the cooling module. Gently pull up on the top of the washer pump/motor housing to send the motor part off the reservoir pin. Use your hand to pull the washer pump upward, so that the pump inlet nipple separates from the filter inside the reservoir. Unscrew the washer pump/motor unit from the washer reservoir, then throw away the rubber seal/filter screen inside the pump hole in the reservoir.

How to Install a Windshield Washer Pump for Front and Rear Windshields on Dodge Journey?

Start by putting a new rubber grommet seal/filter screen into the washer pump mounting hole in the washer reservoir, as well as making certain to not use a previously used one. Set the inlet nipple on the base of the pump housing of the washer pump/motor unit inside the rubber grommet seal/filter screen in the reservoir. Press the top of the washer pump/motor unit handily against the washer pump/motor unit until the inlet nipple seats tightly in the rubber grommet seal/filter screen within the mounting hole of the reservoir. Place the top of the washer pump/motor unit housing into the washer reservoir so it fits into the receptacle. Then, use hand pressure to fully insert the unit and snap it into place. Attach the washer reservoir to the cooling module, add the fresh washer fluid you saved during removal and plug back in the battery negative cable.

OEM Dodge Journey Windshield Washer Pump

Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Windshield Washer Pumps found

View related parts
Dodge Journey Washer Pump Part Number: 5152030AA
$20.46 MSRP: $29.95
You Save: $9.49 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Grommet - Windshield Washer Pump; Windshield Washer Pump Grommet; Washer Pump Grommet; Grommet; Grommet Windshield Washer Pump Pump Grommet; Grommet Windshield Washer Pump
- Replaces: 68225069AA, 68145029AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2020 Dodge Journey | AVP, Base, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Washer Pump Part Number: 5012060AA
$146.90 MSRP: $167.00
You Save: $20.10 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Washer, Headlamp; Washer Pump Repair Kit; Windshield Washer Pump; Headlight Washer Pump; Pump Washer, Headlamp
- Replaces: 68041383AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2017 Dodge Journey | AVP, Base, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SXT | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Washer Pump Part Number: 5179153AC
$112.79 MSRP: $167.00
You Save: $54.21 (33%)
Product Specifications
- Other Name: Pump - Washer, Windshield; Windshield Washer Pump; Washer Pump Repair Kit; Front Pump; Front Washer Pump; Rear Washer Pump; Pump Windshield Washer Dual Outlet; Pump Washer, Windshield
- Replaces: 5179153AB, 5179153AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2020 Dodge Journey | AVP, Base, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX

Dodge Journey Windshield Washer Pump

Choose OEM Windshield Washer Pump that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Windshield Washer Pump follows strict manufacturing steps to lock in quality and fit. If your Dodge Journey matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Journey parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Journey Windshield Washer Pump of Dodge directs fluid from the reservoir to the windshield so that the wiper blades can clear moisture, dirt, and debris for unobstructed vision. The Windshield Washer Pump is located next to the fluid reservoir under the bonnet in the middle. It is an electric pump. When the driver control switch is on, the pump pressurizes the liquid in small hoses that send the liquid to nozzles located close to the glass. The nozzles spray out onto the glass. Thus, a working Windshield Washer Pump is critical for clear visibility on the road. The Windshield Washer Pump relies on straightforward electrical pressure rather than intricate gear systems. As a result, it is not very complex mechanically. That being said, it still needs to be working. If feed lines are cracked, nozzles are clogged, or wiring is damaged, the flow will be interrupted. Interruption of flow means dirt will stay on the glass and will, in turn, reduce visibility. The unit is a single entity of its kind and has the same style designation on the Dodge Journey range, with no variant specified. With extra vigilance, the Dodge nameplate is able to ensure clear sight lines. Moreover, every Journey benefits from a Windshield Washer Pump that can be depended on. In other words, it makes the Dodge Journey driving experience safer whenever rain, dust, or road spray appear through the Journey windshield.

Dodge Journey Windshield Washer Pump Parts and Q&A

Washer Pump
5152030AA
Q:
How to Service and Repair a Windshield Washer Pump for Front and Rear Windshields on Dodge Journey?
A:
Remove the negative cable from the battery to disconnect and isolate the front and rear windshield washers and protect the electrical system. Take out the washer fluid from the tank and keep it in a clean, reusable bottle. Change the washer reservoir by getting rid of it from the cooling module. Gently pull up on the top of the washer pump/motor housing to send the motor part off the reservoir pin. Use your hand to pull the washer pump upward, so that the pump inlet nipple separates from the filter inside the reservoir. Unscrew the washer pump/motor unit from the washer reservoir, then throw away the rubber seal/filter screen inside the pump hole in the reservoir.
Washer Pump
5012060AA
Q:
How to Install a Windshield Washer Pump for Front and Rear Windshields on Dodge Journey?
A:
Start by putting a new rubber grommet seal/filter screen into the washer pump mounting hole in the washer reservoir, as well as making certain to not use a previously used one. Set the inlet nipple on the base of the pump housing of the washer pump/motor unit inside the rubber grommet seal/filter screen in the reservoir. Press the top of the washer pump/motor unit handily against the washer pump/motor unit until the inlet nipple seats tightly in the rubber grommet seal/filter screen within the mounting hole of the reservoir. Place the top of the washer pump/motor unit housing into the washer reservoir so it fits into the receptacle. Then, use hand pressure to fully insert the unit and snap it into place. Attach the washer reservoir to the cooling module, add the fresh washer fluid you saved during removal and plug back in the battery negative cable.