How Does Wheelhouse Handle Rear Fender Liner Service and Repair on Dodge Neon?

The first thing to do for service and repair of the rear fender liner is to remove the wheel. After that, remove the two screws and the three push-pin fasteners. To install the shield, fit it first, back it up using the pins and screws, then install the wheel as usual.

How Does Wheelhouse Assist in Servicing and Repairing the Front Fender Liner on Dodge Neon?

First, raise the car on safety stands, support it so it's balanced and take off the front wheel. After that, pop open the fasteners along the splash shield, along with the screws at the front of the front fender to detach the wheelhouse splash shield. With the components removed, then remove the splash shield from the car. To install, reattach the body splash shield to the bottom of the vehicle, then put in the screw through the front fender and push in the fasteners on either side of the frame down to the rear and forward of the suspension. After that, put the front wheel back in and get the vehicle down off the jack.

OEM Dodge Neon Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Wheelhouses found

View related parts
Dodge Neon Fender Liner, Front Driver Side Part Number: 5008677AB
$91.31 MSRP: $105.00
You Save: $13.69 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Fender Splash Shield, Front Left
- Position: Front Driver Side
- Replaces: 5008095AC, 5008095AB, 5008675AA, 5008677AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2005 Dodge Neon | ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 1.6L L4, 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Neon Fender Liner, Front Passenger Side Part Number: 5008676AB
Product Specifications
- Other Name: Shield - Splash; Fender Splash Shield, Front Right
- Position: Front Passenger Side
- Replaces: 5008094AC, 5008676AA, 5008094AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2005 Dodge Neon | ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 1.6L L4, 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Neon Splash Shield, Front Part Number: 5008389AC
Product Specifications
- Other Name: Shield - Accessory Drive; Fender Splash Shield, Front; Fender Splash Shield
- Position: Front
- Replaces: 4888564, 5008389AB, 5008389AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2005 Dodge Neon | ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 1.6L L4, 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Neon Fender Liner Part Number: 5256932
Product Specifications
- Other Name: Shield; Fender Splash Shield; Shield Wheelhouse
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Neon | ACR, Base, High Line, R/T, Sport | 4 Cyl 2.0 L GAS
View related parts
Dodge Neon Fender Liner Part Number: 5256933
Product Specifications
- Other Name: Shield - Wheelhouse; Fender Splash Shield; Shield Wheelhouse
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Neon | ACR, Base, High Line, R/T, Sport | 4 Cyl 2.0 L GAS
View related parts
Dodge Neon Wheelhouse Liner, Rear Driver Side Part Number: 5008071AC
Product Specifications
- Other Name: Shield - Wheelhouse; Wheel Housing Side Panel, Rear Left; Shield Wheelhouse
- Position: Rear Driver Side
- Replaces: 5008071AB, 5008071AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2005 Dodge Neon | ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Neon Wheelhouse Liner, Rear Passenger Side Part Number: 5008070AC
Product Specifications
- Other Name: Shield - Wheelhouse; Wheel Housing Side Panel, Rear Right; Fender Splash Shield; Shield Wheelhouse
- Position: Rear Passenger Side
- Replaces: 5008070AB, 5008070AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2005 Dodge Neon | ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 2.0L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Dodge Neon Wheelhouse

Choose OEM Wheelhouse that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Wheelhouse follows strict manufacturing steps to lock in quality and fit. If your Dodge Neon matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Neon parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Neon Wheelhouse Parts and Q&A

Wheelhouse Liner, Rear Passenger Side
5008070AC
Q: How Does Wheelhouse Handle Rear Fender Liner Service and Repair on Dodge Neon?
A:
The first thing to do for service and repair of the rear fender liner is to remove the wheel. After that, remove the two screws and the three push-pin fasteners. To install the shield, fit it first, back it up using the pins and screws, then install the wheel as usual.
Fender Liner, Front Driver Side
5008677AB
Q: How Does Wheelhouse Assist in Servicing and Repairing the Front Fender Liner on Dodge Neon?
A:
First, raise the car on safety stands, support it so it's balanced and take off the front wheel. After that, pop open the fasteners along the splash shield, along with the screws at the front of the front fender to detach the wheelhouse splash shield. With the components removed, then remove the splash shield from the car. To install, reattach the body splash shield to the bottom of the vehicle, then put in the screw through the front fender and push in the fasteners on either side of the frame down to the rear and forward of the suspension. After that, put the front wheel back in and get the vehicle down off the jack.