How to Service and Repair a Drive Shaft for Rear LD on Dodge Ram 3500?

Before servicing or fixing the rear propeller shaft, place the car on a hoist and put it in neutral. Apply marks on the propeller shaft, pinion flange and propeller shaft flange during installation. If you have a vehicle with a manual transmission, indicate the areas of both the manual transmission flange and the propeller shaft flange. If your vehicle uses a center bearing, sketch it out on the bracket as a guide and afterward hold up the propeller shaft and remove the bolts. Then, take out the bolts holding the pinion flange to the propeller shaft, slide the shaft backward away from the automatic transmission/transfer case output shaft and put a mark on both shafts for reference during installation. Take out the flange bolts if your bike has a manual transmission. The next step is to take out the propeller shaft from the car. Slide the slip yoke onto the output shaft of the automatic transmission/transfer case, so that the marks are matched up. Place the transmission and propeller shaft so that the reference marks are in alignment, then fit new flange bolts and tighten to 115 Nm. If your equipment has two sections in the propeller shaft, match the center bearing with the reference marks on the bracket and tighten the bolts to 54 Nm. After that, position the reference marks on the propeller shaft and propeller flange, place the new companion flange bolts in place and tighten them to 115 Nm.

How to Safely Detach a Drive Shaft on Dodge Ram 3500?

You should put the vehicle into neutral and have it raised on a hoist before you remove the drive shaft. Always put installation reference marks on the propeller shaft pinion flange and propeller shaft flange. In case those flanges are needed, label both the transmission flange and the propeller shaft flange for installation instructions. If the shaft under the propeller is held by a center bearing, indicate its position on the bracket and prop up the shaft to separate the center bearing bolts. Following this, remove the bolts holding the pinion flange to the propeller shaft. Gently slide the propeller shaft off the automatic transmission/transfer case output shaft, being sure to record their positions so they can be easily put back when the installation is complete. Should your motor have a transmission flange, unfasten the connecting bolts. Ultimately, you should remove the propeller shaft to avoid causing driveline vibration.

OEM Dodge Ram 3500 Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

90 Drive Shafts found

View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52123390AD
$932.62 MSRP: $1430.00
You Save: $497.38 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52123390AC, 52123390AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52123104AB
$1685.13 MSRP: $2575.00
You Save: $889.87 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52123104AA, 52853186AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Dodge Ram 3500 | Laramie, SLT, ST, Sport, TRX4 | 5.9L L6, 6 Cyl 5.9 L DIESEL, 6.7L L6
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52123220AD
$2082.93 MSRP: $3165.00
You Save: $1082.07 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52123220AA, 52123220AB, 52123152AA, 52123220AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 5.7L V8, 5.9L L6, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52123021AC
$1036.23 MSRP: $1525.00
You Save: $488.77 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Front
- Replaces: 52123021AB, 52123021AA, 52105990AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52123386AC
$2994.55 MSRP: $4540.00
You Save: $1545.45 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 2-Piece
- Replaces: 52123386AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52105871AB
$846.47 MSRP: $1073.05
You Save: $226.58 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2001 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52123120AA
$18.62 MSRP: $107.00
You Save: $88.38 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport | 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52123139AC
$668.53 MSRP: $1015.00
You Save: $346.47 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 2-Piece
- Replaces: 52123139AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52123360AC
$814.39 MSRP: $1235.00
You Save: $420.61 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 2-Piece
- Replaces: 52123360AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52123327AC
$1065.22 MSRP: $1620.00
You Save: $554.78 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52123327AB, 52123327AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52123394AC
$2359.18 MSRP: $3580.00
You Save: $1220.82 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 2-Piece
- Replaces: 52123394AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52123149AC
$727.09 MSRP: $1100.00
You Save: $372.91 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52123149AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52123129AE
$898.37 MSRP: $1360.00
You Save: $461.63 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52123129AB, 52105633AE, 52123129AA, 52123129AC, 52123129AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52123532AB
$921.57 MSRP: $1390.00
You Save: $468.43 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 2-Piece
- Replaces: 52123532AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52123162AC
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52123162AB, 52123162AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport | 5.9L L6, 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52105866AB
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52123122AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52853185AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Dodge Ram 3500 | Laramie, SLT, ST, Sport, TRX4 | 5.9L L6, 6 Cyl 5.9 L DIESEL
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52123105AB
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52123105AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Ram 3500 | Laramie, SLT, ST, Sport, TRX4 | 5.9L L6, 6 Cyl 5.9 L DIESEL
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52123138AC
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52123138AA, 52123138AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Dodge Ram 3500 | Laramie, SLT, ST, Sport, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6.7L L6
View related parts
Dodge Ram 3500 Drive Shaft Part Number: 52123110AC
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52123110AB, 52105930AC, 52105930AE, 52105930AF, 52105930AD, 52105930AB, 52123110AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport | 5.7L V8, 8 Cyl 5.7 L GAS

| Page 1 of 5 |Next >

1-20 of 90 Results

Dodge Ram 3500 Drive Shaft

Choose OEM Drive Shaft that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Drive Shaft follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Ram 3500 Drive Shaft is a cylindrical metallic bar that connects the engine or the transmission system and the drive Wheels, thus, delivers power well. This component has the primary purpose of withstanding torsional forces as well as shear stress and at the same time be as lightweight as possible to minimize the affect of inertia. The Dodge Ram 3500 usually uses either the universal joint or splined joint where there are normally divergence in the alignment between the engine and the rear axle. Types of Drive Shafts that have been used in Dodge Ram 3500 varies with years, we have one part and two part Drive Shafts. The two-piece Drive Shaft is especially noticeable in having features of crash safety. Four-wheel and all-wheel drive cars do this by having several Drive Shafts some of which are maintained by transfer cases which distribute the power between the front and rear axles. These types of Drive Shaft are used in increasing the performance and durability of the Dodge Ram 3500 as well as responding to different driving modality and setup.

Dodge Ram 3500 Drive Shaft Parts and Q&A

Drive Shaft
52123021AC
Q: How to Service and Repair a Drive Shaft for Rear LD on Dodge Ram 3500?
A:
Before servicing or fixing the rear propeller shaft, place the car on a hoist and put it in neutral. Apply marks on the propeller shaft, pinion flange and propeller shaft flange during installation. If you have a vehicle with a manual transmission, indicate the areas of both the manual transmission flange and the propeller shaft flange. If your vehicle uses a center bearing, sketch it out on the bracket as a guide and afterward hold up the propeller shaft and remove the bolts. Then, take out the bolts holding the pinion flange to the propeller shaft, slide the shaft backward away from the automatic transmission/transfer case output shaft and put a mark on both shafts for reference during installation. Take out the flange bolts if your bike has a manual transmission. The next step is to take out the propeller shaft from the car. Slide the slip yoke onto the output shaft of the automatic transmission/transfer case, so that the marks are matched up. Place the transmission and propeller shaft so that the reference marks are in alignment, then fit new flange bolts and tighten to 115 Nm. If your equipment has two sections in the propeller shaft, match the center bearing with the reference marks on the bracket and tighten the bolts to 54 Nm. After that, position the reference marks on the propeller shaft and propeller flange, place the new companion flange bolts in place and tighten them to 115 Nm.
Drive Shaft
52123220AD
Q: How to Safely Detach a Drive Shaft on Dodge Ram 3500?
A:
You should put the vehicle into neutral and have it raised on a hoist before you remove the drive shaft. Always put installation reference marks on the propeller shaft pinion flange and propeller shaft flange. In case those flanges are needed, label both the transmission flange and the propeller shaft flange for installation instructions. If the shaft under the propeller is held by a center bearing, indicate its position on the bracket and prop up the shaft to separate the center bearing bolts. Following this, remove the bolts holding the pinion flange to the propeller shaft. Gently slide the propeller shaft off the automatic transmission/transfer case output shaft, being sure to record their positions so they can be easily put back when the installation is complete. Should your motor have a transmission flange, unfasten the connecting bolts. Ultimately, you should remove the propeller shaft to avoid causing driveline vibration.