How to Service and Repair Brake Lines While Creating an ISO Flare and Performing Double Inverted Flaring on Dodge Sprinter 2500?

A preformed metal brake tube works best for brake line service, yet when factory parts are not available, you can use a double-wall steel tube instead. Trim the damaged tube with a Tubing Cutter and later clean out any burrs from the inside to create an ISO flare. Attach the tube nut to your tube, put it in the flaring tool so it's level with the top of the bar and tighten the bar. Place the correct size adapter over the tube, align it with the flaring tool yoke screw, attach it tightly and use a lubricant. Adjust the yoke screw to make the adaptor perfectly sit on the tool bar. To use a double inverted flare, cut off the part that's leaking with a Tubing Cutter, smooth the cut edge with a reamer and attach a new tube nut. Push the tubing into the tube flaring machine, slide the gauge form over the tip and press until it reaches the groove that fits with your tube. Twist the tool handle tight, put the plug in the gauge, lift and hook the compression disc to the gauge and center the flaring screw in the indent. Driver the handle of the tool to allow the plug gauge to sit levelly on the jaws to start the inverted flare, remove the plug gauge and continue the procedure by hand.

OEM Dodge Sprinter 2500 Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Lines found

View related parts
Dodge Sprinter 2500 Flex Hose, Rear Part Number: 5119313AA
$24.30 MSRP: $53.70
You Save: $29.40 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Rear; Brake Hose; Brake Line; Hose Brake; Hydraulic Hose
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Flex Hose, Front Part Number: 68013581AB
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Front; Brake Hydraulic Hose; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front
- Replaces: 68013581AA, 68013582AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

Dodge Sprinter 2500 Brake Line

Choose OEM Brake Line that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Line follows strict manufacturing steps to lock in quality and fit. If your Dodge Sprinter 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sprinter 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Sprinter 2500 Brake Line is one of the hydraulic brake systems that support the transportation of brake fluid from the master cylinder to the brake caliper pistons. This Dodge Sprinter 2500 Brake Line has received a lot of commendations for its steady quality and performance which are essential in diverse driving challenges; it proves to be significant in supporting the increase in brake safety and effectiveness. This has stressed the importance of universal luxury mobile for compatibility on different kinds of Sprinter 2500 arrangements for example; 4-door vans, 2-door pickup trucks, and a 4-door minibus. Dodge Sprinter 2500 Brake Line is corrosion and damage resistant, which are the major setbacks when it comes to metal brake lines; this ensures that no fluid leaks nor loss of hydraulic pressure. Also, the easily sourced prebent brake line kits and corrosion-resistant stainless steel hoses enable easy replacement of the braces hence allowing the drivers to recover the braking system's integrity. For those who wants better performance, going to the better quality hoses which is the braided stainless steel hoses can improve the brake pedal feel, it becomes firmer and more responsive. Thus, Dodge Sprinter 2500 Brake Line not only helps the car establish greater control and driving experience but it also symbolizes the ethos of the brand, providing more safety and dependability to the cars, which makes it significant option for the car drivers.

Dodge Sprinter 2500 Brake Line Parts and Q&A

Flex Hose, Rear
5119313AA
Q: How to Service and Repair Brake Lines While Creating an ISO Flare and Performing Double Inverted Flaring on Dodge Sprinter 2500?
A:
A preformed metal brake tube works best for brake line service, yet when factory parts are not available, you can use a double-wall steel tube instead. Trim the damaged tube with a Tubing Cutter and later clean out any burrs from the inside to create an ISO flare. Attach the tube nut to your tube, put it in the flaring tool so it's level with the top of the bar and tighten the bar. Place the correct size adapter over the tube, align it with the flaring tool yoke screw, attach it tightly and use a lubricant. Adjust the yoke screw to make the adaptor perfectly sit on the tool bar. To use a double inverted flare, cut off the part that's leaking with a Tubing Cutter, smooth the cut edge with a reamer and attach a new tube nut. Push the tubing into the tube flaring machine, slide the gauge form over the tip and press until it reaches the groove that fits with your tube. Twist the tool handle tight, put the plug in the gauge, lift and hook the compression disc to the gauge and center the flaring screw in the indent. Driver the handle of the tool to allow the plug gauge to sit levelly on the jaws to start the inverted flare, remove the plug gauge and continue the procedure by hand.