You should first take out the
Grille and its covering to service and fix the front bumper. Subsequently, remove the license plate bracket by taking out its bolts. Pull the bumper a little toward the front and take out the outside temperature indicator temperature sensor. Remove the Parktronic system connector, together with the electrical connectors from the front fog lamps on the right and left side, before taking the bumper off. To take apart, push the step platform located on the front bumper down and disconnect it from the rear and next, unclip the front mesh and air grille from the bumper. Release the two wiring connectors and disconnect them, release the lugs holding the Parktronic sensors and then remove the sensors. Afterwards, take out the screws to take off the fog lamps.