How to maintain and fix a hood hinge on Dodge Stratus?

For servicing the hood hinge, lift the hood on the side you need to repair and note the positions where the hinge should be attached using a grease pencil or appropriate device for installation. Pull away the cowl cover, take out the bolts that join the hood to the hinge, remove the bolts that secure the hinge to the load beam and finally take out the hinge. If you think the hinge needs painting, apply a coat before you fit it on the vehicle and secure it using the bolts. Make all the alignments and screw in the bolts until the torque reaches 28 N.m (20 ft.lbs.). Place the hood so that there is a 4 mm (0.160 in.) gap between the hood and the front fenders and the hood is flush at the top along the fenders using shims if needed. Position the cowl cover back in place and make sure you can open and close the hood without problems.

How to Replace a Hood Hinge on Dodge Stratus?

Start by raising the front of the hood on the replacement side and mark all the places where you'll need to put the bolts and hinge with a grease pencil so it goes easily. First, remove the cowl cover and then, in order, take out the hood bolts, the ones attaching the hinge to the front fender flange and the last ones keep the hinge in place. If you want, paint the hinge before installing it and place it onto the vehicle before fastening with the bolts to the top of the front fender flange. Next, insert the bolts in place, making sure everything you marked lines up and secure them all. The hood should have a 4 mm (0.160 in.) space from the front fenders and be level along the fenders with the top surfaces. You can put shims under the hinges to get that height. Then, put on the cowl cover and examine the hood latch to be certain everything is working as it should.

OEM Dodge Stratus Hood Hinge

Hood Bracket Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Hood Hinges found

View related parts
Dodge Stratus Hinge, Front Passenger Side Part Number: 5905A028
$0.87 MSRP: $6.10
You Save: $5.23 (86%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right
- Position: Front Passenger Side
- Replaces: MR358576
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | R/T, SE, SXT | 2.4L L4, 3.0L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus Hinge, Front Driver Side Part Number: 5905A027
$7.44 MSRP: $52.50
You Save: $45.06 (86%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left
- Position: Front Driver Side
- Replaces: MR358575
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | R/T, SE, SXT | 2.4L L4, 3.0L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus Hinge Part Number: 4646237AC
$8.22 MSRP: $47.15
You Save: $38.93 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hinge Hood
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Dodge Stratus | Base, ES, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Stratus Hinge, Front Passenger Side Part Number: 4814770AG
$27.94 MSRP: $51.30
You Save: $23.36 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right; Hinge Hood
- Position: Front Passenger Side
- Replaces: 4814770AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Dodge Stratus | ES, R/T, SE, SE Plus, SXT | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Stratus Hinge, Front Driver Side Part Number: 4814771AG
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left; Hinge Hood
- Position: Front Driver Side
- Replaces: 4814771AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Dodge Stratus | ES, R/T, SE, SE Plus, SXT | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Stratus Hinge Part Number: 4646236AC
Product Specifications
- Other Name: Hinge - Hood; Hinge Hood
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Dodge Stratus | Base, ES, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

Dodge Stratus Hood Hinge

Choose OEM Hood Hinge that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Hood Hinge follows strict manufacturing steps to lock in quality and fit. If your Dodge Stratus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Stratus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Stratus Hood Hinge functions as an important mechanism for the reliability together with performance capabilities of Dodge Stratus vehicles built between 1995 and 2005. The Dodge Stratus has two hood hinges that maintain hood weight support throughout the engine opening method. The design structure contributes both to performance efficiency and driving security through its ability to maintain a safe secure position for the hood. Extensions of the Hood Hinge can naturally deteriorate thus necessitating routine service upkeep to avoid such problems as spontaneous hood openings. Multiple versions of Dodge Stratus have compatibility with the Stratus Hood Hinge that lets drivers preserve their vehicle's operational capabilities. Customers find Hood Hinge replacements affordable since they cost between $10 and $90 while simple installation requirements make the product accessible to a wide range of users. Customers value the Dodge Stratus Hood Hinge because of its dependable structure and performance reliability which makes it stand out in automotive markets worldwide. The car Hood Hinge enables smooth hood operation while improving driving comfort so it delivers value as a main feature to owners who want their Dodge model to be both safe and efficient. The car Hood Hinge plays an essential role in vehicle construction as it demonstrates the automaker's dedication to producing high-quality performance-focused vehicles.

Dodge Stratus Hood Hinge Parts and Q&A

Hinge, Front Passenger Side
5905A028
Q: How to maintain and fix a hood hinge on Dodge Stratus?
A:
For servicing the hood hinge, lift the hood on the side you need to repair and note the positions where the hinge should be attached using a grease pencil or appropriate device for installation. Pull away the cowl cover, take out the bolts that join the hood to the hinge, remove the bolts that secure the hinge to the load beam and finally take out the hinge. If you think the hinge needs painting, apply a coat before you fit it on the vehicle and secure it using the bolts. Make all the alignments and screw in the bolts until the torque reaches 28 N.m (20 ft.lbs.). Place the hood so that there is a 4 mm (0.160 in.) gap between the hood and the front fenders and the hood is flush at the top along the fenders using shims if needed. Position the cowl cover back in place and make sure you can open and close the hood without problems.
Hinge
4646237AC
Q: How to Replace a Hood Hinge on Dodge Stratus?
A:
Start by raising the front of the hood on the replacement side and mark all the places where you'll need to put the bolts and hinge with a grease pencil so it goes easily. First, remove the cowl cover and then, in order, take out the hood bolts, the ones attaching the hinge to the front fender flange and the last ones keep the hinge in place. If you want, paint the hinge before installing it and place it onto the vehicle before fastening with the bolts to the top of the front fender flange. Next, insert the bolts in place, making sure everything you marked lines up and secure them all. The hood should have a 4 mm (0.160 in.) space from the front fenders and be level along the fenders with the top surfaces. You can put shims under the hinges to get that height. Then, put on the cowl cover and examine the Hood Latch to be certain everything is working as it should.