How to Install a Fog Light Bulb on Dodge Viper?

Before installing the fog lamp bulb 3, be careful not to touch the glass or anything oily to stop the bulb from burning out more quickly. To lock the bulb, turn it 1/4 time clockwise. Then, put the electrical connector onto the bulb. After you're done, put the access panel back inside the wheel well. After that, make sure the fog lamps are pointed correctly; their beam should sit 11 inches above the ground when viewed 25 feet away on an even surface.

How to Replace a Fog Light Bulb on Dodge Viper?

Before servicing the fog/driving lamp bulb, turn the front tire towards the inside and take out the 4-inch rubber plug from the radiator closure panel. After that, remove the rubber seal from the fog lamp using the 4-inch hole in the splash area of the closure panel. Remove the fog lamp's spring wire retainer, lift out the bulb and try not to have your fingers touch the glass of a halogen bulb, as this reduces its life. Insert the new bulb and then reassemble it in the back of the fog lamp. Press and adjust the spring wire to hold the bulb steady and then stick the seal back into the fog lamp. Next, put the 4-inch diameter seal back into the area of the closure against the splash panel.

OEM Dodge Viper Fog Light Bulb

Fog Lamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fog Light Bulbs found

View related parts
Dodge Viper Fog Lamp Bulb, Front Part Number: L0009145
$24.74 MSRP: $36.50
You Save: $11.76 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Fog Light Bulb, Front; Fog Light Bulbs; Car Bulbs; Bulb Fog Lamp 50 Watt; Bulb 9145 Fog Lamp; Bulb 9145
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010, 2003-2006 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Exterior Bulbs Part Number: L00H355W
$14.57 MSRP: $20.75
You Save: $6.18 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb - Fog Lamp; Fog Light Bulbs; Car Bulbs; Fog Lamp Bulb; Bulb; Bulb Fog Lamp H-3 55 Watt
- Replaces: MS820964, L01255H3
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-2002 Dodge Viper | ACR, Base, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS

Dodge Viper Fog Light Bulb

Choose OEM Fog Light Bulb that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Fog Light Bulb follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Fog Light Bulb is a relevant item that allows for better visibility and operational capability of a vehicle in poor meteorological conditions - fog, rain, or snow. Made with the Dodge Viper in mind, these are the Fog Light Bulbs that are located low on the vehicle, and will cast a wide beam of light forward while emitting very little light in the rearward direction. Currently, the Fog Light Bulb can be purchased in Halogen and LED types, the LED options are more bright and long lasting, and generate up to 50% more light than the Halogen bulbs while have the light temperature of up to 8000K. This allows the vehicle to be actively steered through the traffic during, for instance, a blizzard. The Fog Light Bulb is perfect for Viper of RT/10 and GTS models; those who have a Viper model or wants to add one, then this is the premier product to consider. The importance of these Fog Light Bulbs is not simply for the appearance but for the utility it brings where it enables drivers to increase efficiency and safety at night or on certain weather conditions. Also, the Fog Light Bulb is unique in the automotive market since it is constructed to be resilient in its use and performance as expected by Viper consumers. In conclusion, the Fog Light Bulb can be considered as effective, efficient and high-performance, thus it becomes a must-have spare part for the Dodge Viper owner.

Dodge Viper Fog Light Bulb Parts and Q&A

Fog Lamp Bulb, Front
L0009145
Q: How to Install a Fog Light Bulb on Dodge Viper?
A:
Before installing the fog lamp bulb 3, be careful not to touch the glass or anything oily to stop the bulb from burning out more quickly. To lock the bulb, turn it 1/4 time clockwise. Then, put the electrical connector onto the bulb. After you're done, put the access panel back inside the wheel well. After that, make sure the fog lamps are pointed correctly; their beam should sit 11 inches above the ground when viewed 25 feet away on an even surface.
Exterior Bulbs
L00H355W
Q: How to Replace a Fog Light Bulb on Dodge Viper?
A:
Before servicing the fog/driving lamp bulb, turn the front tire towards the inside and take out the 4-inch rubber plug from the radiator closure panel. After that, remove the rubber seal from the fog lamp using the 4-inch hole in the splash area of the closure panel. Remove the fog lamp's spring wire retainer, lift out the bulb and try not to have your fingers touch the glass of a halogen bulb, as this reduces its life. Insert the new bulb and then reassemble it in the back of the fog lamp. Press and adjust the spring wire to hold the bulb steady and then stick the seal back into the fog lamp. Next, put the 4-inch diameter seal back into the area of the closure against the splash panel.