How to Remove a Fuel Level Sensor on Dodge Viper?

You need to take out the fuel pump module at the beginning of the procedure. After that, press the tab and move the fuel level sensor down, lifting it off the pump module's channel. Unplug the retaining tab of the housing from the fuel level sensor wires and then unplug the fuel pump/level sensor connector. Remove the locking wedge, then lift the lock with a screwdriver and pull the terminal out of its place in the connector. Also, take out the fuel level sensor signal and ground wires before removing the connector.

How to Install a Fuel Level Sensor While Ensuring It Is Handled with Care on Dodge Viper?

Be careful when you handle the fuel level sensor since it's delicate and damages can happen if the float falls back into the housing and leads to inaccurate reading of the gauge. Place the signal and ground wires as required and check that all electrical terminals (2) are kept in place by the locking finger (1). Pull the electrical terminal of the fuel level sensor down to its spot at the top of the connector and attach both signal and ground cables to the connector. After that, connect the locking wedge to the connector and connect the fuel pump/level sensor electrical connector (1). Thread the wiring of the fuel level sensor through the retaining tab located on the housing (2). When the electrical sensor comes up with a step, press it all the way into the channel in the housing so that you hear a click. Proceed to set up the fuel pump module after that.

OEM Dodge Viper Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fuel Level Sensors found

View related parts
Dodge Viper Fuel Pump Part Number: 68026581AD
$1823.25 MSRP: $2750.00
You Save: $926.75 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit - Fuel Pump/Level Unit; Fuel Pump and Strainer Set; Electric Fuel Pump; Fuel Sending Unit; Module Kit Fuel Pump/Level Unit
- Replaces: 68026581AA, 68026581AC, 68026581AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Dodge Viper
- 2013 Dodge Viper | 8.4L V10
- 2008-2010 Dodge Viper | 8.4L V10
View More
View related parts
Dodge Viper Fuel Gauge Sending Unit Part Number: 68027708AA
$216.40 MSRP: $265.00
You Save: $48.60 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Level Kit - Fuel; Fuel Sender and Hanger Assembly; Fuel Tank Sending Unit; Fuel Level Sensor; Level Sensor; Level Unit Kit Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017, 2008-2010 Dodge Viper | ACR, Base, GT, GTC, GTS, SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Fuel Pump Part Number: 5086489AA
Product Specifications
- Other Name: Module Kit - Fuel Pump/Level Unit; Fuel Pump and Strainer Set; Fuel Pump Module Assembly; Fuel Sending Unit; Module Kit Fuel Pump/Level Unit
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Viper | SRT-10 | 10 Cyl 8.3 L GAS
View related parts
Dodge Viper Fuel Gauge Sending Unit Part Number: 5017080AA
Product Specifications
- Other Name: Level Kit - Fuel; Fuel Level Sensor; Level Sensor; Level Unit Kit Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Viper | ACR, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Fuel Pump Part Number: 5017074AA
Product Specifications
- Other Name: Module Kit - Fuel Pump/Level Unit; Fuel Sending Unit; Module Kit Fuel Pump/Level Unit
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Viper | ACR, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Fuel Gauge Sending Unit Part Number: 5011545AA
Product Specifications
- Other Name: Level Kit - Fuel; Fuel Level Sensor; Level Sensor; Level Unit Kit Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Dodge Viper | ACR, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Fuel Gauge Sending Unit Part Number: 5086615AA
Product Specifications
- Other Name: Level Package - Fuel; Fuel Sender and Hanger Assembly; Fuel Level Sensor; Level Sensor; Level Unit Kit Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Viper | SRT-10 | 10 Cyl 8.3 L GAS

Dodge Viper Fuel Level Sensor

Choose OEM Fuel Level Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Fuel Level Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

This little device called the Fuel Level Sensor is fairly significant, as it the assured performer for the Dodge Viper. This Fuel Level Sensor is specific and used of identifying fuel levels going up and down irrespective of the weather and informs the drivers on the available fuel. It consists of float, actuating rod and the resistor to send the signals to the fuel gauge where timely refueling can be done to prevent fuel running out situations. This reliability is rather important for the high-performance car like Dodge Viper where efficiency and safety are of utmost importance. Designed to work with one or another model of Viper, the Fuel Level Sensor looks integral part of the automobile, which delivers improvements in the existing complex of the car's systems. The Fuel Level Sensor has one of the best features of performing its operation at high temperature - a sign of its reliability. Besides, it also helps to enhance the working life of the sensor and at the same time strengthens the Viper's image of performance car. Therefore, through properly displaying the precise level of fuel in the tank, the Fuel Level Sensor contributes to the sustenance of the Dodge Viper as one of the leading powerful sports car. Thus, the Fuel Level Sensor is indicative of dependability and power, and though a component of vehicle's efficiency and safety merits improvement, it still serves as imperative for all consumers of the Viper.

Dodge Viper Fuel Level Sensor Parts and Q&A

Fuel Pump
68026581AD
Q: How to Remove a Fuel Level Sensor on Dodge Viper?
A:
You need to take out the fuel pump module at the beginning of the procedure. After that, press the tab and move the fuel level sensor down, lifting it off the pump module's channel. Unplug the retaining tab of the housing from the fuel level sensor wires and then unplug the fuel pump/level sensor connector. Remove the locking wedge, then lift the lock with a screwdriver and pull the terminal out of its place in the connector. Also, take out the fuel level sensor signal and ground wires before removing the connector.
Fuel Gauge Sending Unit
68027708AA
Q: How to Install a Fuel Level Sensor While Ensuring It Is Handled with Care on Dodge Viper?
A:
Be careful when you handle the fuel level sensor since it's delicate and damages can happen if the float falls back into the housing and leads to inaccurate reading of the gauge. Place the signal and ground wires as required and check that all electrical terminals (2) are kept in place by the locking finger (1). Pull the electrical terminal of the fuel level sensor down to its spot at the top of the connector and attach both signal and ground cables to the connector. After that, connect the locking wedge to the connector and connect the fuel pump/level sensor electrical connector (1). Thread the wiring of the fuel level sensor through the retaining tab located on the housing (2). When the electrical sensor comes up with a step, press it all the way into the channel in the housing so that you hear a click. Proceed to set up the fuel pump module after that.