How Can a TPMS Sensor Be Installed and Programmed on Dodge Viper?

Before you fit the tire pressure sender into the wheel, take off the old grommet from the valve stem base and then install both to be certain the base is clean and intact. Fix the pressure sensor on the inner part of the wheel and then fasten it using the sensor-specific nut. The spacing between the sensor and the wheel must be even and tighten the bolt to 4 Nm (35 in. lbs.) without going over this. Apply only the method suggested by the manufacturer of the equipment when mounting the upper bead of the zero pressure tire on the wheel, to protect the wheel and tire. Once the upper bead of the tire is on the wheel, put the valve stem cap on that same valve. Soak the valve stem mount with a soap solution to locate air leaks. Reassemble the tire and wheel by following the correct steps for wheel flange mount and stick-on-wheel weights. Add the tire wheel assembly to the vehicle after that and ensure the TPM module has the new sensor's code. It's important to use a scan tool to check that the TPM module is set up with the ID code from the new tire pressure sensor, with both the code and the required tire pressure figures both found in the vehicle's receiver.

OEM Dodge Viper TPMS Sensor

Tire Pressure Monitoring System Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 TPMS Sensors found

View related parts
Dodge Viper Tire Pressure Sensor Part Number: 68406527AA
$67.79 MSRP: $102.00
You Save: $34.21 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor; Tire Sensor; Pressure Sensor; Sensor
- Replaces: 52088990AD, 52088990AE, 52088990AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Viper | 8.4L V10
- 2003-2006 Dodge Viper | 8.3L V10
View related parts
Dodge Viper TPMS Sensor Part Number: 68406529AB
$108.10 MSRP: $162.00
You Save: $53.90 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Sensor
- Replaces: 68406529AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS

Dodge Viper TPMS Sensor

Choose OEM TPMS Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each TPMS Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The replacement TPMS Sensor is one of the most significant parts to prove its functionality and worth of the Dodge Viper automobile. This advanced TPMS Sensor is exceptionally designed for monitoring tire pressure and thus boosts efficiency as well as safety of drivers. Every Dodge Viper comes with a TPMS Sensor that is installed in diverse positions to suit various Viper versions. The TPMS Sensor comes in two primary types: Application based TPMS and Sensor attached TPMS. While, the iTPMS deals with the estimation of tire pressure through software application, the dTPMS acquires the correct and exact data on tire pressure by using the hardware sensors and for this reason represents the optimal option for many users who prefer accuracy. The TPMS Sensor system also provides notifications to the driver of the possible tire problems, which in turn eliminates possible risks on the road and enhances the performance of the Dodge Viper. This feature is especially useful for a super sporty car like Dodge Viper because tire pressure plays a special role in the car's behavior. Also, the TPMS Sensor is conveniently built to fit various vehicles and comes with simple installation and replacement features, making it excellent in the automobile industry. Being a universal and highly technological TPMS Sensor developed solely for Dodge Viper cars, this product would more than suffice the needs of any Viper enthusiast; Coming with the added advantage of compatibility with different Viper models, this TPMS sensor guarantees the continued providing of high-quality performance to the users.

Dodge Viper TPMS Sensor Parts and Q&A

Tire Pressure Sensor
68406527AA
Q: How Can a TPMS Sensor Be Installed and Programmed on Dodge Viper?
A:
Before you fit the tire pressure sender into the wheel, take off the old grommet from the valve stem base and then install both to be certain the base is clean and intact. Fix the pressure sensor on the inner part of the wheel and then fasten it using the sensor-specific nut. The spacing between the sensor and the wheel must be even and tighten the bolt to 4 Nm (35 in. lbs.) without going over this. Apply only the method suggested by the manufacturer of the equipment when mounting the upper bead of the zero pressure tire on the wheel, to protect the wheel and tire. Once the upper bead of the tire is on the wheel, put the valve stem cap on that same valve. Soak the valve stem mount with a soap solution to locate air leaks. Reassemble the tire and wheel by following the correct steps for wheel flange mount and stick-on-wheel weights. Add the tire wheel assembly to the vehicle after that and ensure the TPM module has the new sensor's code. It's important to use a scan tool to check that the TPM module is set up with the ID code from the new tire pressure sensor, with both the code and the required tire pressure figures both found in the vehicle's receiver.