How to Remove a Water Pump on Dodge Viper?

Before pulling out the water pump, drain all the water from your car's cooling system. After that, separate the throttle body air inlet hose and take out the air cleaner housing assembly. Once the old belt is removed, get rid of the new accessory by removing it according to the procedures mentioned in the manual. Subsequently, unscrew the water pump attaching bolts in the reverse order and take off the whole water pump. In the last step, remove and throw away the gasket covering the water pump.

How to Install a Water Pump on Dodge Viper?

You should first wipe the sealing spots with plastic and suitable cleaner without scratching them. Now, place a new water pump gasket on the end cover and fix the pump to the chain case cover. Attach the water pump with tightened bolts to a torque of 11 Nm (95 in. lbs.), keeping the order the manufacturer specified. Following installation, use your hands to rotate the pump to test its full range of motion. After that, fit the accessory drive belt, then the air cleaner housing assembly and finally attach the throttle body air inlet hose. Afterward, get rid of all the air inside the cooling system and top it off with more fluid and look closely for any leaks.

OEM Dodge Viper Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Water Pumps found

View related parts
Dodge Viper Water Pump Part Number: 5037730AA
Product Specifications
- Other Name: Pump - Water; Pump Water With Pulley; Pump Water
- Replaced by: 5037730AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017, 2008-2010 Dodge Viper | ACR, Base, GT, GTC, GTS, SRT, SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Water Pump Part Number: 5037164AF
Product Specifications
- Other Name: Pump - Water; Engine Water Pump
- Replaces: 5037164AC, 5037164AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Viper | SRT-10 | 10 Cyl 8.3 L GAS, 8.3L V10
View related parts
Dodge Viper Water Pump Part Number: 5037730AB
Product Specifications
- Other Name: Pump - Water; Engine Water Pump
- Replaces: 5037730AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Dodge Viper
- 2008-2010 Dodge Viper
View related parts
Dodge Viper Water Pump Part Number: 4763776AD
Product Specifications
- Other Name: Pump - Water
- Replaces: 4763776AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2002 Dodge Viper | ACR, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Water Pump Part Number: 5245465AB
Product Specifications
- Other Name: Pump - Water; Engine Water Pump
- Replaces: 5245465
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-1996 Dodge Viper | Base | 10 Cyl 8.0 L GAS, 8.0L V10

Dodge Viper Water Pump

Choose OEM Water Pump that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Water Pump follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Water Pump is one of the model's most important parts that speaks volumes about this automobile maker's dependability and prowess. draining condensed water and pumping new water through the radiator the Water Pump is used in cooling down the heat produced during the combustion process to regulate the optimum engine temperature. The majority of Dodge Viper vehicles employ the belt-driven water pump with the impeller; however, the contemporary models employ lightweight aluminum to increase its efficiency. Another part that would be useful to the Viper community would be the Water Pump as it can be used for multiple generations of Viper vehicles. There are high-performance Variants of the Water Pump with greater coolant flow and lower power consumption for high-Re revolution Viper engines. Also, electric water pumps are emerging, and they offer separate coolant circulation, which increases the performance and safety that is required in post-engine shutdown cooling. The Water Pump is not only an important component that enhances the performance of the car but it also has the function of providing protection to the vehicle's engine in as much as it ensures that it does not overheat. The aggressiveness of the car was established in the automotive market through its unique looks and characteristics, which is why it is incorporated into the Dodge Viper. Indeed, the reliability, performance, the essence of advanced engineering that distinguishes the brand, wrap into the Water Pump that is an indispensable part of the legendary car, while also elongating its existence.

Dodge Viper Water Pump Parts and Q&A

Water Pump
5037730AA
Q: How to Remove a Water Pump on Dodge Viper?
A:
Before pulling out the water pump, drain all the water from your car's cooling system. After that, separate the throttle body air inlet hose and take out the air cleaner housing assembly. Once the old belt is removed, get rid of the new accessory by removing it according to the procedures mentioned in the manual. Subsequently, unscrew the water pump attaching bolts in the reverse order and take off the whole water pump. In the last step, remove and throw away the gasket covering the water pump.
Water Pump
5037730AB
Q: How to Install a Water Pump on Dodge Viper?
A:
You should first wipe the sealing spots with plastic and suitable cleaner without scratching them. Now, place a new water pump gasket on the end cover and fix the pump to the chain case cover. Attach the water pump with tightened bolts to a torque of 11 Nm (95 in. lbs.), keeping the order the manufacturer specified. Following installation, use your hands to rotate the pump to test its full range of motion. After that, fit the accessory Drive Belt, then the air cleaner housing assembly and finally attach the throttle body air inlet hose. Afterward, get rid of all the air inside the cooling system and top it off with more fluid and look closely for any leaks.