How Does Wheelhouse Handle Front Fender Liner Service and Repair on Dodge Viper?

Start the front fender liner service by first removing the front wheel from the vehicle. Once the screws and push pin fasteners are out, freed the front splash shield from underneath. With the engine taken out, remove four fender screws and three push pin fasteners lower down, plus two inner screws to remove the rear splash shield. To begin installation, secure the rear splash shield and just tighten the six screws a little. After that, attach the three push pin fasteners and screw them in place. After that, put in the front splash shield, start screwing them in loosely and place and tighten the push pin fastener at last.

How to Install the Front Wheelhouse Splash Shield on Dodge Viper?

The front wheelhouse splash shield should be fitted only after the rear splash shield is connected and temporarily fastened with six screws. Then, insert the three push pin attachments and tighten all the screws. Turn to the front splash shield which you should loosely connect with screws and push in the pin fastener before you tighten the screws.

OEM Dodge Viper Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Wheelhouses found

View related parts
Dodge Viper Splash Shield, Rear Driver Side Part Number: 68284693AD
$356.10 MSRP: $520.00
You Save: $163.90 (32%)
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Quarter Panel Splash Shield, Rear Left; Shield Splash Rear
- Position: Rear Driver Side
- Replaces: 68138277AB, 68138277AF, 68138277AC, 68138277AE, 68284693AB, 68284693AA, 68138277AA, 68138277AG, 68138277AD, 68284693AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Splash Shield, Rear Passenger Side Part Number: 68284692AD
$356.10 MSRP: $520.00
You Save: $163.90 (32%)
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Quarter Panel Splash Shield, Rear Right; Shield Splash Rear
- Position: Rear Passenger Side
- Replaces: 68138276AF, 68284692AA, 68138276AB, 68138276AC, 68138276AA, 68138276AE, 68138276AD, 68138276AG, 68284692AC, 68284692AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Fender Liner Extension, Front Passenger Side Part Number: 4865724AB
$75.74 MSRP: $91.75
You Save: $16.01 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Fender Extension Panel, Front Right; Inner Support; Shield Splash
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010, 2003-2006 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Splash Shield, Rear Driver Side Part Number: 4865649AE
Product Specifications
- Other Name: Shield - Splash; Quarter Panel Splash Shield, Rear Left, Rear Left Upper; Shield Splash
- Position: Rear Driver Side
- Replaces: 4865649AC, 4865649AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Viper | 8.4L V10
- 2003-2006 Dodge Viper | 8.3L V10
View related parts
Dodge Viper Splash Shield, Rear Lower Passenger Side Part Number: 4865646AD
Product Specifications
- Other Name: Shield - Splash; Quarter Panel Splash Shield, Rear Right Lower; Shield Splash
- Position: Rear Lower Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010, 2003-2006 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Fender Liner, Rear Driver Side Part Number: 4865491AC
Product Specifications
- Other Name: Shield - Splash; Fender Splash Shield, Front Left, Rear Left; Shield Splash; Fender Splash Shield
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010, 2003-2006 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Fender Liner Extension, Front Driver Side Part Number: 4865725AB
Product Specifications
- Other Name: Shield - Splash; Fender Extension Panel, Front Left; Inner Support; Shield Splash
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010, 2003-2006 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Splash Shield, Rear Lower Driver Side Part Number: 4865647AD
Product Specifications
- Other Name: Shield - Splash; Quarter Panel Splash Shield, Rear Left Lower; Shield Splash
- Position: Rear Lower Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010, 2003-2006 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Fender Liner, Front Passenger Side Part Number: 4865490AC
Product Specifications
- Other Name: Shield - Splash; Fender Splash Shield, Front Right, Rear Right; Shield Splash; Fender Splash Shield
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010, 2003-2006 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Splash Shield, Rear Upper Passenger Side Part Number: 4865648AE
Product Specifications
- Other Name: Shield - Splash; Quarter Panel Splash Shield, Rear Right, Rear Right Upper; Shield Splash
- Position: Rear Upper Passenger Side
- Replaces: 4865648AC, 4865648AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Viper | 8.4L V10
- 2003-2006 Dodge Viper | 8.3L V10

Dodge Viper Wheelhouse

Choose OEM Wheelhouse that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Wheelhouse follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Viper Wheelhouse Parts and Q&A

Fender Liner Extension, Front Driver Side
4865725AB
Q: How Does Wheelhouse Handle Front Fender Liner Service and Repair on Dodge Viper?
A:
Start the front fender liner service by first removing the front wheel from the vehicle. Once the screws and push pin fasteners are out, freed the front splash shield from underneath. With the engine taken out, remove four fender screws and three push pin fasteners lower down, plus two inner screws to remove the rear splash shield. To begin installation, secure the rear splash shield and just tighten the six screws a little. After that, attach the three push pin fasteners and screw them in place. After that, put in the front splash shield, start screwing them in loosely and place and tighten the push pin fastener at last.
Fender Liner Extension, Front Passenger Side
4865724AB
Q: How to Install the Front Wheelhouse Splash Shield on Dodge Viper?
A:
The front wheelhouse splash shield should be fitted only after the rear splash shield is connected and temporarily fastened with six screws. Then, insert the three push pin attachments and tighten all the screws. Turn to the front splash shield which you should loosely connect with screws and push in the pin fastener before you tighten the screws.