How to install a rear Bumper Cover on Jeep Commander?

Start by passing the park assist sensor wires through the bumper if equipped with them. After that, position the energy absorber and attach it with four push pin fasteners. Install the fascia on the vehicle and connect the electrical connector then install two push pin fasteners. Gently separate the edges of the fascia to avoid contact with the painted surfaces. Line up the slots in the upper sides of the fascia with the two t-pushpins on either side. Using two screws and 4 push pin fasteners, secure the fascia before also using two push pin fasteners at the lower end. To conclude the task, the nuts must be fitted and tightened to 9 Nm, followed by fitting the wheelhouse splash shields to facilitate the fascia via new rivets.

How to remove the rear Bumper Cover (fascia) on Jeep Commander?

To remove the rear bumper cover or fascia, first open the liftgate. Next, take out the four push pin fasteners and two screws located at the step pad area. Then, remove the plastic rivets found at the wheel wells, followed by the two push pin fasteners and the rear wheel splash shields. After that, remove the nuts located at the back sides of the quarter panels. Proceed to take off the fascia and disconnect the electrical connector. Remove the two push pin fasteners, followed by the four push pin fasteners and the energy absorber. Finally, disconnect and remove the park assist electrical sensors and the park assist sensors.

OEM Jeep Commander Bumper Cover

Bumper Shell

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Bumper Covers found

View related parts
Jeep Commander Bumper Cover, Front Part Number: 5183429AA
$356.10 MSRP: $520.00
You Save: $163.90 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Replaces: 5JU641FGAC, 5JU641SBAC, 5JU641B8AC, 5JU641DAAC, 5JU641GVAC, 5JU641S2AC, 5JU641RJAC, 5JU641GJAC, 5JU641JCAC, 5JU641JTAC, 5JU641RHAC, 5JU641BLAC, 5JU641W1AC, 5JU641X8AC, 5JU641EMAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Limited, Overland | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Bumper Cover, Front Part Number: 5183619AA
$326.30 MSRP: $481.00
You Save: $154.70 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Replaces: 1CM69CGVAB, 1CM68AJCAB, 1CM68SW1AB, 1CM69AJCAB, 1CM68DX8AB, 1CM68BJTAB, 1CM68CGVAB, 1CM69SW1AB, 1CM69BJTAB, 1CM69DX8AB, 1CM69ARJAB, 1CM69WSBAB, 1CM68BB8AB, 1CM69BB8AB, 1CM68WSBAB, 1CM68ARJAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | Base, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Bumper Cover, Rear Part Number: 5183499AA
$518.69 MSRP: $759.00
You Save: $240.31 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear Primed
- Position: Rear
- Replaces: 5JU651W1AB, 5JU651B8AC, 5JU651JTAC, 5JU651SBAC, 5JU651RJAC, 5JU651SBAB, 5JU651W1AC, 5JU651B8AB, 5JU651JCAB, 5JU651JTAB, 5JU651JCAC, 5JU651GVAC, 5JU651GVAB, 5JU651RJAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Bumper Cover, Rear Part Number: 68052984AA
$614.87 MSRP: $896.00
You Save: $281.13 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear Primed
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Commander | Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Bumper Cover, Rear Part Number: 5183506AA
$924.02 MSRP: $1350.00
You Save: $425.98 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear Primed
- Position: Rear
- Replaces: 5JU681DAAC, 5JU681JTAB, 5JU681B8AB, 5JU681S2AC, 5JU681RJAB, 5JU681X8AB, 5JU681GVAB, 5JU681EMAC, 5JU681W1AB, 5JU681JCAB, 5JU681SBAB, 5JU681GJAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Bumper Cover, Rear Part Number: 68052985AA
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear Primed
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Commander | Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Bumper Cover

Choose OEM Bumper Cover that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Bumper Cover follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Commander Bumper Cover is the outer body panel that hides the rigid bumper on the vehicle to provide it with a finished look. In addition, this part also plays a role in protection and, in some cases, smoother airflow. Positioned at either the front or rear of vehicle, this Bumper Cover is essentially a part of a multi-piece assembly which may include the likes of grille inserts, light bezels and trim pieces, which help protect important components in the car against impact and road debris. Bumper Cover may have openings to provide cooling air to the radiator, oil cooler or brakes. It may have cavities to house fog lamps, parking lamps and turn signals with decorative surrounds when equipment is not present. A small cover can also conceal the threaded anchor point for the tow eye hook itself when not in use, maintaining a clean appearance. In case of collision or prolonged exposure to sunshine damages the Bumper Cover plastic, it must be inspected and replaced. Replacement Bumper Covers for Jeep Commander help to restore fit, styling, and basic protective function. Essentially, a properly installed Jeep Commander Bumper Cover will help in keeping the Jeep Commander structurally sound and looking the same. Quite simply, for any driver of a Jeep Commander, the Bumper Cover will be an essential exterior element.

Jeep Commander Bumper Cover Parts and Q&A

Bumper Cover, Rear
5183499AA
Q: How to install a rear Bumper Cover on Jeep Commander?
A:
Start by passing the park assist sensor wires through the bumper if equipped with them. After that, position the energy absorber and attach it with four push pin fasteners. Install the fascia on the vehicle and connect the electrical connector then install two push pin fasteners. Gently separate the edges of the fascia to avoid contact with the painted surfaces. Line up the slots in the upper sides of the fascia with the two t-pushpins on either side. Using two screws and 4 push pin fasteners, secure the fascia before also using two push pin fasteners at the lower end. To conclude the task, the nuts must be fitted and tightened to 9 Nm, followed by fitting the wheelhouse splash shields to facilitate the fascia via new rivets.
Bumper Cover, Rear
5183506AA
Q: How to remove the rear Bumper Cover (fascia) on Jeep Commander?
A:
To remove the rear bumper cover or fascia, first open the liftgate. Next, take out the four push pin fasteners and two screws located at the step pad area. Then, remove the plastic rivets found at the wheel wells, followed by the two push pin fasteners and the rear wheel splash shields. After that, remove the nuts located at the back sides of the quarter panels. Proceed to take off the fascia and disconnect the electrical connector. Remove the two push pin fasteners, followed by the four push pin fasteners and the energy absorber. Finally, disconnect and remove the park assist electrical sensors and the park assist sensors.