How to Replace a Headlight Bulb for Both Low and High Beams on Jeep Commander?

You should start by disconnecting and isolating the negative cable from the battery to service the headlamp bulbs. Open the cover on top of the front lamp unit and pull away the pigtail wire connector from its place on the bulb at the back of the housing. Make sure you are holding the bulb base. Then gently rotate it counterclockwise until it unlocks and pull the bulb and base straight away from the keyed opening on the reflector. Choose a size and type of bulb that fits to stop the lamp from overheating or getting damaged. Place the base of the bulb onto the keyed opening at the back of the reflector, insert them both and then turn the base of the bulb clockwise about 30 degrees so it locks in position. Afterwards, screw the front lamp unit cover back in place, hook the pigtail wire connector to the bulb base and re-attach the battery negative wire.

How to Prevent Overheating and Damage to Your Headlight Bulb on Jeep Commander?

Always use the recommended brand and type of bulb when replacing the headlamp, because substituting the wrong one might bring about heating and damage to related areas. Always clean and dry your hands before touching the bulb to prevent anything embarrassing which may decrease the lifespan of the bulb. Both the low and high beams require the same service method, differing only in their location, size and type of bulb. Make sure the low-beam or high-beam bulb's base fits into the slot at the back of the reflector. Insert the bulb and base into the reflector so that the base is secure and then turn the base clockwise a quarter turn to secure it. Carefully insert the end of the pigtail from the connector receptacle back into the front lamp unit, cover the lamp assembly and reattach the battery's negative cable.

OEM Jeep Commander Headlight Bulb

Headlamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Headlight Bulbs found

View related parts
Jeep Commander Headlamp Bulb, Rear Part Number: L002825W5W
$7.42 MSRP: $10.70
You Save: $3.28 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb; Center Stop; Turn/Parking; Plate; Side Marker; Daytime Running; Tail & Headlight; Tail Lamp Bulb; various exterior and interior bulbs including W5W and W10/5 types.
- Position: Rear
- Replaces: 153625, L2825W5WLL, 68317490AA, 5104608AA, 5104648AA, MS820090
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Jeep Commander | Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Headlamp Bulb, Front Part Number: L0009005
$25.20 MSRP: $37.00
You Save: $11.80 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight Bulb, Front; Headlight Bulbs; Car Bulbs; High Beam Bulb; Headlamps; Composite Bulb; Lower Beam Bulb; Exterior Bulbs.
- Position: Front
- Replaces: MS820959
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Bulb & Socket, Front Part Number: L0009006
$26.50 MSRP: $38.95
You Save: $12.45 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight Bulb, Front; Fog Light Bulb; Fog Light Bulbs; Headlight Bulbs; Car Bulbs; Headlamp Bulb; High Beam, Roof, Fog, Lower Beam, Composite Bulbs; Bulb 9006; Headlight.
- Position: Front
- Replaces: 5096939AA, MS820960
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Jeep Commander | 65th Anniversary Edition, Base, Limited | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Headlamp Bulb, Front Part Number: L0009006PV
$14.57 MSRP: $27.70
You Save: $13.13 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight Bulb, Front; Headlight Bulbs; Car Bulbs; Lower Beam Bulb; Bulb Headlamp
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Jeep Commander | Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Headlight Bulb

Choose OEM Headlight Bulb that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Headlight Bulb follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Headlight Bulb is a replacement part that is very essential for the proper functioning of a car particularly during poor traffic and at night. This specifically manufactured headlight bulb meets all the requirements of the Jeep Commander automobiles and delivers high-quality performance as well as a safer drive on the roads. Applicable to various Commander models from the XK to the 2022 Meridian, Headlight Bulb is available in Halogen types, HID, or LED types with their respective prospects. There is a newer and much brighter Halogen bulb which at least offers 50% more brightness as well as the LED headlight conversion kits offering the optimal light blending, longer life and a wider beam to ensure jeep users get the optimal out of their vehicles. The Headlight Bulb not only serves as a tool to enhance visibility but also enhances the acceptable driving conditions since the drivers do not have to struggle to maneuver through such regions. Moreover, it has fast installation that makes it even more popular due to the ease Jeep Commander owners can make changes to their lighting systems. Thanks to the implemented technologies and convenient control, Headlight Bulb appears to serve a great demand in automotive line, thus strengthening the Jeep's position as a producer of reliable vehicles. In sum, obtaining a genuine Headlight Bulb will always help any Jeep owner to increase the vehicle's security and performance on the road.

Jeep Commander Headlight Bulb Parts and Q&A

Headlamp Bulb, Front
L0009005
Q: How to Replace a Headlight Bulb for Both Low and High Beams on Jeep Commander?
A:
You should start by disconnecting and isolating the negative cable from the battery to service the headlamp bulbs. Open the cover on top of the front lamp unit and pull away the pigtail wire connector from its place on the bulb at the back of the housing. Make sure you are holding the bulb base. Then gently rotate it counterclockwise until it unlocks and pull the bulb and base straight away from the keyed opening on the reflector. Choose a size and type of bulb that fits to stop the lamp from overheating or getting damaged. Place the base of the bulb onto the keyed opening at the back of the reflector, insert them both and then turn the base of the bulb clockwise about 30 degrees so it locks in position. Afterwards, screw the front lamp unit cover back in place, hook the pigtail wire connector to the bulb base and re-attach the battery negative wire.
Headlamp Bulb, Front
L0009006PV
Q: How to Prevent Overheating and Damage to Your Headlight Bulb on Jeep Commander?
A:
Always use the recommended brand and type of bulb when replacing the headlamp, because substituting the wrong one might bring about heating and damage to related areas. Always clean and dry your hands before touching the bulb to prevent anything embarrassing which may decrease the lifespan of the bulb. Both the low and high beams require the same service method, differing only in their location, size and type of bulb. Make sure the low-beam or high-beam bulb's base fits into the slot at the back of the reflector. Insert the bulb and base into the reflector so that the base is secure and then turn the base clockwise a quarter turn to secure it. Carefully insert the end of the pigtail from the connector receptacle back into the front lamp unit, cover the lamp assembly and reattach the battery's negative cable.