How to Install a Radiator Support on Jeep Commander?

First, fit the radiator crossmember by attaching the top part, then add the fasteners on the side and tighten them well. After that, put the nuts on the end of the radiator crossmember support for the latch and check they are securely tightened to 11 Nm (8 ft. lbs.). After that, install the grille assembly and the hood seal. In the end, try on the hood and adjust it if necessary.

OEM Jeep Commander Radiator Support

Center Radiator Support

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Radiator Support found

View related parts
Jeep Commander Upper Tie Bar Brace Part Number: 55396492AB
Product Specifications
- Other Name: Crossmember - Radiator Crossmember; Radiator Support Tie Bar Brace; Brace Radiator Crossmember
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Radiator Support

Choose OEM Radiator Support that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Radiator Support follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Commander Radiator Support Parts and Q&A

Upper Tie Bar Brace
55396492AB
Q: How to Install a Radiator Support on Jeep Commander?
A:
First, fit the radiator crossmember by attaching the top part, then add the fasteners on the side and tighten them well. After that, put the nuts on the end of the radiator crossmember support for the latch and check they are securely tightened to 11 Nm (8 ft. lbs.). After that, install the Grille assembly and the hood seal. In the end, try on the hood and adjust it if necessary.