How to Safely Install Liftgate Lift Support on Jeep Compass?

Ensure you open the trunk or liftgate because gas prop will be pressurized during installation and can cause injury or damage if done while it's closed. Don't try to handle or fix the cylinders until they are put back in place. Make sure that retaining clips 1 are sitting firmly inside the ball socket 2 before continuing. Then, position cylinder 2 over ball studs 3 and snap its thin end inside the body, so the retaining clips fall into place.

How to Safely Service Liftgate Lift Support on Jeep Compass?

Before touching the shock support for the trunk or liftgate, confirm the liftgate is opened and held up by someone. Pull the ball socket from the ball stud while loosening the retaining clips with a small flat tool. Raise the clips a little to allow the ball studs to come out. After that, take the support cylinder out of both the upper and lower ball studs. You should not remove the liftgate support cylinders if the liftgate is closed, as the high-pressure gas inside them can result in personal danger or car damage. If you remove the support cylinders, do not try to disassemble or fix them.

OEM Jeep Compass Liftgate Lift Support

Back Door Stay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Liftgate Lift Supports found

View related parts
Jeep Compass Lift Cylinder Part Number: 5115226AB
$43.43 MSRP: $64.55
You Save: $21.12 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller/Gas - Liftgate; Hatch, Back Glass, Tailgate, and Door Lift Support.; Support Strut; Propeller Liftgate; Lift Support
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Compass | 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Lift Cylinder Part Number: 5109514AB
$43.43 MSRP: $64.55
You Save: $21.12 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller/Gas - Liftgate; Hatch, Back Glass, Tailgate, and Door Lift Support.; Support Strut; Propeller Liftgate; Lift Support
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Compass | 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Lift Cylinder, Driver Side Part Number: 68250005AC
$46.29 MSRP: $68.85
You Save: $22.56 (33%)
ADD TO CART
Product Specifications
- Other Name: Propeller/Gas - Liftgate; Hatch Lift Support, Left; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Propeller Liftgate; Lift Support
- Position: Driver Side
- Replaces: 68250005AB, 68250005AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Jeep Compass | 80th Anniversary, Altitude, High Altitude, Latitude, Latitude Lux, Limited, Red, Sport, Trailhawk, Upland | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Lift Cylinder, Passenger Side Part Number: 68250004AC
$46.29 MSRP: $68.85
You Save: $22.56 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller/Gas - Liftgate; Hatch Lift Support, Right; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Propeller Liftgate; Lift Support
- Position: Passenger Side
- Replaces: 68250004AA, 68250004AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Jeep Compass | 80th Anniversary, Altitude, High Altitude, Latitude, Latitude Lux, Limited, Red, Sport, Trailhawk, Upland | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Lift Cylinder, Driver Side Part Number: 68242419AB
$47.76 MSRP: $71.05
You Save: $23.29 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller/Gas - Liftgate; Hatch Lift Support, Left; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Propeller Liftgate; Lift Support
- Position: Driver Side
- Replaces: 68242419AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Jeep Compass | 80th Anniversary, Altitude, High Altitude, Latitude, Latitude Lux, Limited, Red, Sport, Trailhawk, Upland | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Compass Lift Cylinder, Passenger Side Part Number: 68242418AB
$47.76 MSRP: $71.05
You Save: $23.29 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller/Gas - Liftgate; Hatch Lift Support, Right; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Propeller Liftgate; Lift Support
- Position: Passenger Side
- Replaces: 68242418AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Jeep Compass | 80th Anniversary, Altitude, High Altitude, Latitude, Latitude Lux, Limited, Red, Sport, Trailhawk, Upland | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Jeep Compass Liftgate Lift Support

Choose OEM Liftgate Lift Support that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Liftgate Lift Support follows strict manufacturing steps to lock in quality and fit. If your Jeep Compass matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Compass parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Compass Liftgate Lift Support Parts and Q&A

Lift Cylinder
5109514AB
Q: How to Safely Install Liftgate Lift Support on Jeep Compass?
A:
Ensure you open the trunk or liftgate because gas prop will be pressurized during installation and can cause injury or damage if done while it's closed. Don't try to handle or fix the cylinders until they are put back in place. Make sure that retaining clips 1 are sitting firmly inside the ball socket 2 before continuing. Then, position cylinder 2 over ball studs 3 and snap its thin end inside the body, so the retaining clips fall into place.
Lift Cylinder
5115226AB
Q: How to Safely Service Liftgate Lift Support on Jeep Compass?
A:
Before touching the shock support for the trunk or liftgate, confirm the liftgate is opened and held up by someone. Pull the ball socket from the ball stud while loosening the retaining clips with a small flat tool. Raise the clips a little to allow the ball studs to come out. After that, take the support cylinder out of both the upper and lower ball studs. You should not remove the liftgate support cylinders if the liftgate is closed, as the high-pressure gas inside them can result in personal danger or car damage. If you remove the support cylinders, do not try to disassemble or fix them.