How to install the parking brake Backing Plate on Jeep Grand Cherokee?

To install the parking brake backing plate, fasten the support plate to the axle flange, and then tighten the three bolts to 115 Nm (85 ft. lbs.). Following this, the parking brake cable gets connected to the brake actuator lever before you fit the park brake shoes. Begin the installation of the axle shaft and position axle shaft flange nuts to secure it. After that, you will install the wheel speed sensor and adjust the brake shoes to the drum with a brake gauge. Next, put the rotor on. Followed by the caliper and four slide bolts. Conclude the procedure with the installation of the wheel and tire assembly.

How to service and repair the parking brake Backing Plate on Jeep Grand Cherokee?

To repair the parking brake backing plate, you must first remove the wheel and tire assembly. Then, do as follows: remove the slide bolts for the disc brake caliper. Next, remove the rotor. Afterward, remove the wheel speed sensor, the axle flange nuts and the axle shaft. To detach the parking brake cable from the brake actuator lever, the park brake shoes will have to be removed. Remove support plate from axle tube at last. To install the bracket, the support plate must be placed on the axle flange, and the attaching bolts are to be tightened to 115 Nm (85 ft. lbs.). Connect the parking brake cable to the brake actuator lever, the assembly of the park brake shoes, axle shaft and axle shaft flange nuts. Use a Brake Gauge to Adjust the Brake Shoes to the Drum and Reinstall Wheel Speed Sensor. Finish the process by installing the rotor, caliper and slide bolts and the wheel and tire assembly.

OEM Jeep Grand Cherokee Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Backing Plates found

View related parts
Jeep Grand Cherokee Backing Plate, Front Driver Side Part Number: 52005477
$38.93 MSRP: $83.70
You Save: $44.77 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Brake; Brake Dust Shield, Front Left; Splash Shield; Shield, Splash, Right; Shield Brake
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1998 Jeep Grand Cherokee | 5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Jeep Grand Cherokee Backing Plate, Front Driver Side Part Number: 52090433AC
$25.54 MSRP: $37.80
You Save: $12.26 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Splash Shield; Dust Shield; Shield Splash; Brake Dust Shield
- Position: Front Driver Side
- Replaces: 52090433AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Jeep Grand Cherokee | 65th Anniversary Edition, Laredo, Limited, Overland | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Backing Plate, Front Passenger Side Part Number: 52090432AC
$25.54 MSRP: $37.80
You Save: $12.26 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Splash Shield; Dust Shield; Shield Splash; Brake Dust Shield
- Position: Front Passenger Side
- Replaces: 52090432AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Jeep Grand Cherokee | 65th Anniversary Edition, Laredo, Limited, Overland | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Backing Plate Part Number: 68346851AB
$9.08 MSRP: $13.60
You Save: $4.52 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Splash Shield
- Replaces: 68346851AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Backing Plate Part Number: 68346850AB
$9.36 MSRP: $14.05
You Save: $4.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Splash Shield
- Replaces: 68346850AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Backing Plate, Front Passenger Side Part Number: 68376756AB
$11.01 MSRP: $16.45
You Save: $5.44 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Splash Shield
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Backing Plate, Front Passenger Side Part Number: 68257202AA
$10.33 MSRP: $15.40
You Save: $5.07 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Splash Shield; Shield Splash; Brake Dust Shield
- Position: Front Passenger Side
- Replaces: 52124764AE, 52124764AD, 52124764AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2022 Jeep Grand Cherokee | 4xe, 75th Anniversary, 80th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, Overland Summit, SRT, SRT8, Summit, Summit Reserve, Trackhawk, Trailhawk, Upland | 3.0L V6, 3.6L V6, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Grand Cherokee SHIELD-SPLASH Part Number: 68349663AB
$9.42 MSRP: $13.85
You Save: $4.43 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Backing Plate, Front Driver Side Part Number: 68257203AA
$10.56 MSRP: $15.50
You Save: $4.94 (32%)
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Splash Shield; Shield Splash; Brake Dust Shield
- Position: Front Driver Side
- Replaces: 52124765AE, 52124765AD, 52124765AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2022 Jeep Grand Cherokee | 4xe, 75th Anniversary, 80th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, Overland Summit, SRT, SRT8, Summit, Summit Reserve, Trackhawk, Trailhawk, Upland | 3.0L V6, 3.6L V6, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Grand Cherokee Backing Plate, Front Driver Side Part Number: 68376757AB
$11.93 MSRP: $16.45
You Save: $4.52 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Splash Shield
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Backing Plate, Rear Driver Side Part Number: 68466363AA
$100.53 MSRP: $139.00
You Save: $38.47 (28%)
ADD TO CART
Product Specifications
- Other Name: Plate - Parking Brake; Parking Brake Assembly, Rear Left; Brake Caliper Bracket; Brake Dust Shield; Brake Assembly; Adapter; Adapter Assembly Parking Brake
- Position: Rear Driver Side
- Replaces: 52124969AE, 52124969AD, 68273495AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2021 Jeep Grand Cherokee | 75th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, Overland Summit, SRT, SRT8, Summit, Trackhawk, Trailhawk, Upland | 3.0L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Grand Cherokee Backing Plate, Rear Passenger Side Part Number: 68466362AA
$104.89 MSRP: $145.00
You Save: $40.11 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate - Parking Brake; Parking Brake Assembly, Rear Right; Brake Caliper Bracket; Brake Dust Shield; Brake Assembly; Adapter; Adapter Assembly Parking Brake
- Position: Rear Passenger Side
- Replaces: 52124968AD, 52124968AE, 68273494AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2021 Jeep Grand Cherokee | 75th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, Overland Summit, SRT, SRT8, Summit, Trackhawk, Trailhawk, Upland | 3.0L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Grand Cherokee Backing Plate, Rear Driver Side Part Number: 68376819AB
$10.10 MSRP: $14.95
You Save: $4.85 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Rear Left
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Backing Plate, Rear Passenger Side Part Number: 68376818AB
$10.10 MSRP: $14.95
You Save: $4.85 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Rear Right
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Backing Plate, Rear Driver Side Part Number: 68347569AB
$10.90 MSRP: $16.00
You Save: $5.10 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Rear Left
- Position: Rear Driver Side
- Replaces: 68347569AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Backing Plate, Rear Passenger Side Part Number: 68347568AB
$10.90 MSRP: $16.00
You Save: $5.10 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Rear Right
- Position: Rear Passenger Side
- Replaces: 68347568AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Backing Plate, Front Passenger Side Part Number: 52005476
Product Specifications
- Other Name: Shield - Brake; Brake Dust Shield, Front Right; Splash Shield; Shield, Splash, Right; Shield Brake
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1998 Jeep Grand Cherokee | 5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Jeep Grand Cherokee Backing Plate, Rear Part Number: 52089418AC
Product Specifications
- Other Name: Plate - Parking Brake; Parking Brake Assembly, Rear; Brake Caliper Bracket; Brake Dust Shield; Adapter
- Position: Rear
- Replaces: 52089418AB, 52089418AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Jeep Grand Cherokee | 65th Anniversary Edition, Laredo, Limited, Overland | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Grand Cherokee Backing Plate

Choose OEM Backing Plate that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Backing Plate follows strict manufacturing steps to lock in quality and fit. If your Jeep Grand Cherokee matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Cherokee parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Grand Cherokee Backing Plate Parts and Q&A

Backing Plate, Front Passenger Side
52090432AC
Q: How to install the parking brake Backing Plate on Jeep Grand Cherokee?
A:
To install the parking brake backing plate, fasten the support plate to the axle flange, and then tighten the three bolts to 115 Nm (85 ft. lbs.). Following this, the parking brake cable gets connected to the brake actuator lever before you fit the park brake shoes. Begin the installation of the axle shaft and position axle shaft flange nuts to secure it. After that, you will install the wheel speed sensor and adjust the brake shoes to the drum with a brake gauge. Next, put the rotor on. Followed by the caliper and four slide bolts. Conclude the procedure with the installation of the wheel and tire assembly.
Backing Plate, Front Driver Side
52090433AC
Q: How to service and repair the parking brake Backing Plate on Jeep Grand Cherokee?
A:
To repair the parking brake backing plate, you must first remove the wheel and tire assembly. Then, do as follows: remove the slide bolts for the disc brake caliper. Next, remove the rotor. Afterward, remove the wheel speed sensor, the axle flange nuts and the axle shaft. To detach the parking brake cable from the brake actuator lever, the park brake shoes will have to be removed. Remove support plate from axle tube at last. To install the bracket, the support plate must be placed on the axle flange, and the attaching bolts are to be tightened to 115 Nm (85 ft. lbs.). Connect the parking brake cable to the brake actuator lever, the assembly of the park brake shoes, axle shaft and axle shaft flange nuts. Use a Brake Gauge to Adjust the Brake Shoes to the Drum and Reinstall Wheel Speed Sensor. Finish the process by installing the rotor, caliper and slide bolts and the wheel and tire assembly.