How Should a Catalytic Converter Be Installed and What Precautions Are Necessary on Jeep Patriot?

Before you tighten the clamps, ensure that everything in the system is aligned and that all clearances are right. Install both the under floor catalytic converter and the supports for the isolator under the car. Place the gasket on the vehicle with the white side at the rear, put the springs and bolts in and tighten these to 33 Nm (24 ft. lbs.). After that, put the I-Pipe/muffler assembly in place. Place each component at the front end, ensure its clearance with the underbody and then fasten the band clamps to 55 Nm (40 ft. lbs.). Avoid tightening the band clamps so far that the clamp band styles touch the center midsection of the hourglass-shaped block or this could make the clamp loosen and need to be replaced. Changing to a new clamp involves lining up its opening to the line on the post and tightening it carefully. Start up the engine and watch for exhaust leaks; if any are found, fix them as soon as possible. Complete your check by reviewing the way the exhaust touches the bodywork and adjust it if necessary.

How to Remove and Replace the Under-Floor Catalytic Converter on Jeep Patriot?

First, you should install the catalytic converter and the isolator supports to the bottom of the vehicle. Put the gasket with its white side against the rear end, add the springs and bolts and tighten them to 33 Nm (24 ft. lbs.). After that, install the I-Pipe/muffler assembly. From the front side, line up every element so they are not too tight or too loose and near any underbody equipment, then secure them with 55 Nm (40 ft. lbs. of force). Ensure that you don't tighten the band clamps so far that both halves connect at the center hourglass block, since this will cause the band to stretch and may lead to it being replaced. Always install a new clamp with the clamp's grip facing the handle. Once everything is installed, fire up the engine and check for exhaust leaks, carry out any repairs and ensure the system is separated from the body.

OEM Jeep Patriot Catalytic Converter

Cat. Converter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Catalytic Converters found

View related parts
Jeep Patriot Catalytic Converter Part Number: 68066677AE
$1172.10 MSRP: $1715.00
You Save: $542.90 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Front; Catalytic Converter, Rear; Exhaust Pipe; Converter & Pipe
- Replaces: 68066677AC, 68066677AD, 68066677AA, 68066677AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Catalytic Converter, Rear Part Number: 68045346AB
$1418.28 MSRP: $2080.00
You Save: $661.72 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust; Catalytic Converter, Rear
- Position: Rear
- Replaces: 68045346AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Patriot | Limited, Sport | 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Catalytic Converter, Front Part Number: 57008368AA
$1083.94 MSRP: $1575.00
You Save: $491.06 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Front; Exhaust Pipe; Converter & Pipe
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Exhaust Manifold Part Number: 68096391AC
$1607.20 MSRP: $2335.00
You Save: $727.80 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust And Catalytic Converter; Converter & Pipe; Manifold Exhaust And Catalytic Converter Maniverter; Catalytic Converter
- Replaces: 68096391AB, 68096391AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2013 Jeep Patriot | Latitude, Latitude X, Limited, Sport | 2.4L L4, 4 Cyl 2.4 L GAS
- 2009 Jeep Patriot | 2.4L L4
View related parts
Jeep Patriot Catalytic Converter Part Number: 68043484AA
$1767.50 MSRP: $2590.00
You Save: $822.50 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe; Converter Catalytic If Vin Filtered, Check Item 4; Pipe And Converter Exhaust; Converter Catalytic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Patriot | Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Catalytic Converter, Rear Part Number: 5105049AC
$1790.40 MSRP: $2620.00
You Save: $829.60 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter, Rear; Exhaust Pipe; Converter & Pipe; Converter Catalytic If Vin Filtered, Check Item 4; Converter Catalytic
- Position: Rear
- Replaces: 5105049AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Jeep Patriot | Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Catalytic Converter Part Number: 5105126AD
$1579.15 MSRP: $2310.00
You Save: $730.85 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Exhaust Pipe; Converter & Pipe; Converter Catalytic If Vin Filtered, Check Item 4; Converter Catalytic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Jeep Patriot | Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Catalytic Converter, Rear Part Number: 5105131AD
Product Specifications
- Other Name: Converter - Exhaust; Catalytic Converter, Rear; Exhaust Pipe; Converter & Pipe
- Position: Rear
- Replaces: 5105131AC, 5105131AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Jeep Patriot | Limited, Sport | 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Exhaust Manifold Part Number: 68066674AC
Product Specifications
- Other Name: Converter - Exhaust And Catalytic Converter; Catalytic Converter with Integrated Exhaust Manifold; Manifold Converter; Converter & Pipe; Manifold Exhaust & Catalytic Converter Maniverter.
- Replaces: 68066674AB, 68066674AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Jeep Patriot | 2.4L L4
View related parts
Jeep Patriot Catalytic Converter Part Number: 5105428AD
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe; Pipe And Converter Exhaust
- Replaces: 5105428AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Jeep Patriot | Limited, Sport | 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Catalytic Converter Part Number: 5105460AF
Product Specifications
- Other Name: Converter - Exhaust And Catalytic Converter; Catalytic Converter with Integrated Exhaust Manifold; Exhaust Manifold
- Replaces: 5105460AD, 5105460AC, 5105460AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2013 Jeep Patriot | Latitude, Latitude X, Limited, Sport | 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Jeep Patriot Catalytic Converter

Choose OEM Catalytic Converter that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Catalytic Converter follows strict manufacturing steps to lock in quality and fit. If your Jeep Patriot matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Patriot parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Catalytic Converter in Jeep Patriot model is part of the exhaust and emissions systems; it is specifically engineered to change toxic pollutions emitted through the combustion process into less toxic. It mainly changes carbon monoxide (CO), hydrocarbons (HC), and oxides of nitro-gen (NOx) to water, carbon dioxide (CO2), and nitrogen (N2) by catalytic reaction using platinum, palladium, and rhodium. Jeep Patriots over the years have employed a variety of technologies in their use of catalytic converters; the two-way catalytic converter and the modern three-way catalytic converter, which became standard equipment in the year 1981. The major difference between these types is in their capacity to lower NOx emissions, which, along with CO and HC, are oxidized. Performance catalytic converters are also available in the market that is high flow,for increase the engine performance but catalyst efficiency is necessary. These converters are available direct fit or universal; however, the direct fit converters are easier to install.

Jeep Patriot Catalytic Converter Parts and Q&A

Catalytic Converter, Rear
5105049AC
Q: How Should a Catalytic Converter Be Installed and What Precautions Are Necessary on Jeep Patriot?
A:
Before you tighten the clamps, ensure that everything in the system is aligned and that all clearances are right. Install both the under floor catalytic converter and the supports for the isolator under the car. Place the gasket on the vehicle with the white side at the rear, put the springs and bolts in and tighten these to 33 Nm (24 ft. lbs.). After that, put the I-Pipe/muffler assembly in place. Place each component at the front end, ensure its clearance with the underbody and then fasten the band clamps to 55 Nm (40 ft. lbs.). Avoid tightening the band clamps so far that the clamp band styles touch the center midsection of the hourglass-shaped block or this could make the clamp loosen and need to be replaced. Changing to a new clamp involves lining up its opening to the line on the post and tightening it carefully. Start up the engine and watch for exhaust leaks; if any are found, fix them as soon as possible. Complete your check by reviewing the way the exhaust touches the bodywork and adjust it if necessary.
Catalytic Converter
5105126AD
Q: How to Remove and Replace the Under-Floor Catalytic Converter on Jeep Patriot?
A:
First, you should install the catalytic converter and the isolator supports to the bottom of the vehicle. Put the gasket with its white side against the rear end, add the springs and bolts and tighten them to 33 Nm (24 ft. lbs.). After that, install the I-Pipe/muffler assembly. From the front side, line up every element so they are not too tight or too loose and near any underbody equipment, then secure them with 55 Nm (40 ft. lbs. of force). Ensure that you don't tighten the band clamps so far that both halves connect at the center hourglass block, since this will cause the band to stretch and may lead to it being replaced. Always install a new clamp with the clamp's grip facing the handle. Once everything is installed, fire up the engine and check for exhaust leaks, carry out any repairs and ensure the system is separated from the body.